Pictures of your recumbent
-
- Posts: 4664
- Joined: 2 Aug 2015, 4:40pm
Re: Pictures of your recumbent
"Like a rocket!!!!"
That is just what I had expected.
Thanks for reply and enjoy your lovely machine.
It's definitely a cut cut above the rest!
That is just what I had expected.
Thanks for reply and enjoy your lovely machine.
It's definitely a cut cut above the rest!
- hoarder
- Posts: 151
- Joined: 17 Jul 2012, 7:04am
- Location: South of Newmarket, SW of Bury St. Edmunds. ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ sƃuıɥʇ ʇɐ ƃuıʞool
Re: Pictures of your recumbent
A "Goodbye" to my first recumbent, from 2009. Delivered to a new owner just outside Edinburgh today - it brings good memories: meeting up for Rides with Cookie, Daveyboy, Brian and others, learning to build a wheel (the 26" Big Apple'd rear was one I made myself , with the original 700c relegated for occasional use), early-morning rides pre-dawn all blinged up, and several thousand miles around East Anglia. I couldn't resist a quick ride up and down their street before handing it over. Ah, happy days.......
Re: Pictures of your recumbent
After a posting on one of the other topics on this board I’ve realised that I’ve yet to post any photos of our ICE tandem and my Challenge Seiran.
The tandem is currently OOA after one of the steering linkage joints snapped right at the end on last years Tandem Club National Rally in Northumberland. It’s not a difficult repair for a competent welder, I’ve just not gotten round to it yet. Once I’ve finished our current round of house renovations I focus on the ICE tandem and give her a full refit and a re-spray.
I’ve had the Seiran for a couple of years now but having done a couple of long trips away at sea during that period I’ve not ridden it as much as I’d have liked to. The photos show it in touring mode on North Uist and on a day ride to Loch Goil.
tmp_9346-Photo0196~2-1809646093 by Joseph Bulloch, on Flickr
IMG_20170401_134846293 by Joseph Bulloch, on Flickr
20170303_084249 by Joseph Bulloch, on Flickr
The tandem is currently OOA after one of the steering linkage joints snapped right at the end on last years Tandem Club National Rally in Northumberland. It’s not a difficult repair for a competent welder, I’ve just not gotten round to it yet. Once I’ve finished our current round of house renovations I focus on the ICE tandem and give her a full refit and a re-spray.
I’ve had the Seiran for a couple of years now but having done a couple of long trips away at sea during that period I’ve not ridden it as much as I’d have liked to. The photos show it in touring mode on North Uist and on a day ride to Loch Goil.
tmp_9346-Photo0196~2-1809646093 by Joseph Bulloch, on Flickr
IMG_20170401_134846293 by Joseph Bulloch, on Flickr
20170303_084249 by Joseph Bulloch, on Flickr
-
- Posts: 297
- Joined: 10 Apr 2007, 8:25pm
- Location: King's Lynn, Norfolk
Re: Pictures of your recumbent
Finally got this beastie back on the road. Low, fast and awesome fun. It's got a bit of history behind it. It belongs to an old friend of mine, Bob Smith, who I've sadly lost contact with. It was the prototype and testbed for the Redmount Roller, a hand built production recumbent trike designed and built in King's Lynn by Bob and the late Mike Allen. It's been in my shed gathering dust for years but all it needed was a clean up, lube and a new back tyre. I've also fitted a mudguard and rack.
It really needs a new seat mesh as the stitching's going . I've tried the one one my wife's ICE Adventure and it fits well (actually better than the original) but unsurprisingly she wanted it back! If anyone knows there whereabouts of an older-style (without the side cushion bits) ICE seat mesh for a reasonable price I have a home for it.
Also, if anyone knows Bob's whereabouts let him know his trike is in good hands!
It really needs a new seat mesh as the stitching's going . I've tried the one one my wife's ICE Adventure and it fits well (actually better than the original) but unsurprisingly she wanted it back! If anyone knows there whereabouts of an older-style (without the side cushion bits) ICE seat mesh for a reasonable price I have a home for it.
Also, if anyone knows Bob's whereabouts let him know his trike is in good hands!
Re: Pictures of your recumbent
Define a reasonable price - I'd quite like to get a new seat (I can ask when I'm at ICE next week to see if they have any old stock as well)
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
There are two kinds of people in this world: those can extrapolate from incomplete data.
-
- Posts: 297
- Joined: 10 Apr 2007, 8:25pm
- Location: King's Lynn, Norfolk
Re: RE: Re: Pictures of your recumbent
[XAP]Bob wrote:Define a reasonable price - I'd quite like to get a new seat (I can ask when I'm at ICE next week to see if they have any old stock as well)
I was looking at £20-30 although that's probably a bit optimistic!
I'm a trendy consumer. Just look at my GT-S7275R using hovercraft full of eels.
Re: Pictures of your recumbent
My new ride:
By chance I've got a used ICE Vortex cruciform last Tuesday and after a deep dive into the used parts bin, build this ICE Vortex/Sprint 26 mongrel.
It handles very nicely with the 24" front wheels! I'm still tinkering a bit with the set-up. There is a new set of 700c rims on order, for instance.
btw, if anybody got a used ICE Q, QNT or Sprint cruciform for sale, I might be interested...
By chance I've got a used ICE Vortex cruciform last Tuesday and after a deep dive into the used parts bin, build this ICE Vortex/Sprint 26 mongrel.
It handles very nicely with the 24" front wheels! I'm still tinkering a bit with the set-up. There is a new set of 700c rims on order, for instance.
btw, if anybody got a used ICE Q, QNT or Sprint cruciform for sale, I might be interested...
ICE VTX 3x700, ICE Vortex-Leader 3x26", ICE Sprint 26 eTrike, Milan GT
Blog: http://etrike.wordpress.com
Blog: http://etrike.wordpress.com
Re: Pictures of your recumbent
Several small updates later (head rest, new lights, new 19t Ginkgo idler, new IGUS rod ends, Avid BB7 park brake), I went on a little wheel building spree on the rainy weekend and she got a new set of 26" wheels, shod with 50-559 Kojak, yesterday.
The seat has to come a wee bit higher, though. 'Laid back' doesn't begin to describe the feeling when riding with the current seat angle...
The seat has to come a wee bit higher, though. 'Laid back' doesn't begin to describe the feeling when riding with the current seat angle...
Last edited by Marc on 6 Jun 2017, 10:56pm, edited 1 time in total.
ICE VTX 3x700, ICE Vortex-Leader 3x26", ICE Sprint 26 eTrike, Milan GT
Blog: http://etrike.wordpress.com
Blog: http://etrike.wordpress.com
Re: Pictures of your recumbent
How much does the additional wheel height affect:
- Steering geometry (scrub in corners)
- Braking geometry (I presume you now get brake steer)
- Stability (bump steer?)
- Steering lock (wheels conflicting with the seat at a lower turning angle?)
- Speed (:D)
- Steering geometry (scrub in corners)
- Braking geometry (I presume you now get brake steer)
- Stability (bump steer?)
- Steering lock (wheels conflicting with the seat at a lower turning angle?)
- Speed (:D)
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
There are two kinds of people in this world: those can extrapolate from incomplete data.
Re: Pictures of your recumbent
[XAP]Bob wrote:How much does the additional wheel height affect:
- Steering geometry (scrub in corners)
- Braking geometry (I presume you now get brake steer)
- Stability (bump steer?)
- Steering lock (wheels conflicting with the seat at a lower turning angle?)
- Speed (:D)
I didn't notice much scrub around corners, actually.
The 26" wheels doesn't affect the steering behavior noticably more than the 24" front wheels of my other Sprint. I've described some of it here: viewtopic.php?f=24&t=15204&start=390#p1041556
When going in a straight line, brake steer is very similar to a stock Sprint/Vortex with 20" front wheels. Neglegible to simply not detectable.
When braking while cornering, the outer wheel pushes the trike into the corner slightly (exactly opposite to 20" wheels). It gets progessivly stronger, the further you steer into the corner. So, if you really push the trike at speed around corners and lift the inside wheel, braking the outside wheel actually helps cornering. This 'behavior change' was slightly irritating at first, but is a 'feature' I've very quickly learn to appeciate (I like to go fast around corners).
No bump steer. The steering gets a tiny bit more 'heavy' and self centering is more pronounced. It is still a very quick handling trike, though.
The wheels doesn't conflict with the seat, albeit even 24" wheels come too close to the stock Vortex handlebar.
The 'new' handlebar is a mix of the ICE handlebar middle part, a cut down Rans B-41 handlebar (for the 'handles') and a longer 120mm head set stem to move the handle bar further back (the stock ICE stem is 90mm, the Vortex/VTX stem about 110mm). The longer stem also provides enough space for the bigger idler.
Turning circle is about 5m. Maybe 5,2m. Similar to a stock Sprint and smaller than the Vortex (ICE states 5-5,4m for the Sprint and 7,4m for the Vortex).
Speed:
I don't know, yet. I was a bit powered out from a 80+km ride I did on an other trike, befor mounting the the big wheels on this one and took it for a short spin. The currently mounted Kojaks are not exactly speed demons, though: http://www.bicyclerollingresistance.com ... kojak-2017
I've used faster 24" Schwalbe Shredda Evo at the front and a fast Marathon Almotion at the rear for a while and the trike is quick. It could be way faster with a better motor, though...
Last edited by Marc on 19 Aug 2018, 2:37pm, edited 1 time in total.
ICE VTX 3x700, ICE Vortex-Leader 3x26", ICE Sprint 26 eTrike, Milan GT
Blog: http://etrike.wordpress.com
Blog: http://etrike.wordpress.com
Re: Pictures of your recumbent
Latest additions to the N=N+1 stable...
The Hase Kettwiesel we got last September and has been in use all winter (just over 5000 km). The Sprint is just on the road now and was supplied in partial kit form direct from ICE, then completed with
Now just need to sell my car as it hardly ever gets used any more. Should just about pay for the Sprint and Kett.
26-Sep-2017 update - car sold! Now there's little excuse, or get-out, for not cycling to work by cycle. I'd have to go via my wife's workplace and finish early enough to pick her up again at the end of the day.
The Hase Kettwiesel we got last September and has been in use all winter (just over 5000 km). The Sprint is just on the road now and was supplied in partial kit form direct from ICE, then completed with
- Hope Crankset
Hope X2 disc brakes and B&M lights transplanted from another bike (only 6000 km)
Rohloff from my old touring bike (31000 km but polished up nicely; 34:16 for climbing, 15.2-80 gear inches)
Alexrims TD17 32H rear rim instead of the 36H normally supplied by ICE (to go with the old Rohloff)
Tubus rack scavenged from our Hase Pino after we electrified it
Now just need to sell my car as it hardly ever gets used any more. Should just about pay for the Sprint and Kett.
26-Sep-2017 update - car sold! Now there's little excuse, or get-out, for not cycling to work by cycle. I'd have to go via my wife's workplace and finish early enough to pick her up again at the end of the day.
Last edited by Lodge on 26 Sep 2017, 12:46pm, edited 1 time in total.
-
- Posts: 29
- Joined: 24 Sep 2017, 11:20pm
Re: Pictures of your recumbent
This ones called a white swan. It came with a sturmey archer 8 speed hub gear which is great for learning with. Its a bit on the heavy side but my bent legs are forming at an accelerated rate. Recumbents are the future.
Re: Pictures of your recumbent
speedy7777 wrote:This ones called a white swan. It came with a sturmey archer 8 speed hub gear which is great for learning with. Its a bit on the heavy side but my bent legs are forming at an accelerated rate. Recumbents are the future.
I like the minimalism.
I particularly like the direct chain line on the drive run.
- hoarder
- Posts: 151
- Joined: 17 Jul 2012, 7:04am
- Location: South of Newmarket, SW of Bury St. Edmunds. ǝןƃuɐ ʇuǝɹǝɟɟıp ɐ ɯoɹɟ sƃuıɥʇ ʇɐ ƃuıʞool
Re: Pictures of your recumbent
Curious as to where the white chain tubes came from...... or are they just run-of-the-mill black ones, bleached ?
-
- Posts: 29
- Joined: 24 Sep 2017, 11:20pm
Re: Pictures of your recumbent
The white tubes are some sort of plumbing pipe thats made in belgium. Its got plastic outer layer, aluminium middle layer, and a clear plastic inner layer.
This means they can be bent to form curves easily. Scince the photo ive trimmed them down to the bare minimum length.
This means they can be bent to form curves easily. Scince the photo ive trimmed them down to the bare minimum length.