bb30 in old frame
bb30 in old frame
I have a Shimano square taper bottom bracket in a Dolan alu frame , about 15 years old. Does a bb30, or any other system, fit the older, standard , bottom bracket thread ? I ask because I've seen a lot of FSA chainsets with bb30 or hollow tech bb"s...and crucially, they are pretty cheap. I fully expect to be disappointed , I'm happy to use Shimano kit but it's nice to have plenty of choice.
Re: bb30 in old frame
Best summary.
http://www.sheldonbrown.com/cribsheet-b ... ckets.html
It'll be an English threaded bottom bracket, so lots of modern systems will work. Bb30 is not one of them !
I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels
http://www.sheldonbrown.com/cribsheet-b ... ckets.html
It'll be an English threaded bottom bracket, so lots of modern systems will work. Bb30 is not one of them !
I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels
Re: bb30 in old frame
Shimano Hollowtech II cranksets will fit. You will have to buy a new HTII BB to fit one.
BB30 cranksets do not work with regular threaded BB shells.
BB30 cranksets do not work with regular threaded BB shells.
I should coco.
Re: bb30 in old frame
Valbrona wrote:Shimano Hollowtech II cranksets will fit. You will have to buy a new HTII BB to fit one.
BB30 cranksets do not work with regular threaded BB shells.
"native" BB30 chainset yes, but there's BB30 chainsets with a longer axle, also the 386 standard, those can rely on external cups (like a Hollowtech2 cups, but bigger)
It is by riding a bicycle that you learn the contours of a country best,
since you have to sweat up the hills and coast down them.
Thus you remember them as they actually are...
since you have to sweat up the hills and coast down them.
Thus you remember them as they actually are...
- martin biggs
- Posts: 816
- Joined: 23 Apr 2007, 8:02am
- Location: northamptonshire
Re: bb30 in old frame
ok whilst we are talking about bb's , does a hollowtech crankset fit in a press fit bottom bracket ?
Re: bb30 in old frame
martin biggs wrote:ok whilst we are talking about bb's , does a hollowtech crankset fit in a press fit bottom bracket ?
Most likely yes, there's a jungle of adapters. You can even convert a BB30 to BSA threaded if you wish so.
"press-fit" is a very generic term, you need to specify the shell ID and width.
It is by riding a bicycle that you learn the contours of a country best,
since you have to sweat up the hills and coast down them.
Thus you remember them as they actually are...
since you have to sweat up the hills and coast down them.
Thus you remember them as they actually are...
Re: bb30 in old frame
many of the possible choices are listed on this page
http://wheelsmfg.com/complete-crankset-bb-adapter-guide
cheers
http://wheelsmfg.com/complete-crankset-bb-adapter-guide
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
- martin biggs
- Posts: 816
- Joined: 23 Apr 2007, 8:02am
- Location: northamptonshire
Re: bb30 in old frame
Brucey wrote:many of the possible choices are listed on this page
http://wheelsmfg.com/complete-crankset-bb-adapter-guide
cheers
thats looks like a good site thanks
Re: bb30 in old frame
Hope do an external bottom bracket that will fit and is available as a 30mm axle diameter, which means a bb30 chainset will work with it.
I have one on a bike, works as a standard external BB(24mm) would.
I have one on a bike, works as a standard external BB(24mm) would.