Shimano do shims which sits in the hood which shortens the reach. if you cant find them would be fairly easy to make
https://www.bikeparts.co.uk/products/sh ... 20Strategy
Search found 4084 matches
- 3 Dec 2021, 2:08pm
- Forum: Women's cycling interests
- Topic: STI levers for small hands
- Replies: 20
- Views: 11240
- 2 Dec 2021, 4:32pm
- Forum: The Tea Shop
- Topic: More policing by social media
- Replies: 114
- Views: 3503
Re: More policing by social media
I remember the Chief Constable of Essex being asked after a multi-car pile up in foggy conditions being asked if the weather was the cause of the accidents . He replied no the weather did not cause the accident bad driving caused the accidents., I would say the same applies here, it not just an accident the driver was too close/not concentrating etc, but the drivers fell short of the competence required.
- 29 Nov 2021, 11:22am
- Forum: Does anyone know … ?
- Topic: Wide fitting cycling shoes
- Replies: 9
- Views: 787
Re: Wide fitting cycling shoes
if your not worried about SPD. Walking shoes such as Meryl might be worth a look waterproof and you have more of choice of width. they have a thick stiff sole
- 4 Nov 2021, 11:39am
- Forum: Off-road Cycling.
- Topic: 29er tyres for moderate off-road
- Replies: 8
- Views: 4934
Re: 29er tyres for moderate off-road
WTB Raddler, byway or venture , depending on how road orientated you need to be. I assume 29 is 700c but wider tyres, especially tubeless they are good. I use the venture on sandy stuff round here, but they are still good for on road.
- 28 Oct 2021, 1:00pm
- Forum: Does anyone know … ?
- Topic: Barry Hoban bike.
- Replies: 18
- Views: 1524
Re: Barry Hoban bike.
No they never did to my knowledge, I met Barry at Calder Clarion evening when he turned up with a load of Gear Shorts and shorts for sale, in the mid 70s. Funnily enough my dad new Arthur as well, Although Dad was COSA and not NUM.thirdcrank wrote: ↑26 Oct 2021, 12:04pmDid they ever meet more recently? Your dad might have wondered if he'd learned to talk proper at the same place as Arthur Scargill
- 27 Oct 2021, 10:13am
- Forum: On the road
- Topic: Greetings whilst riding
- Replies: 153
- Views: 11882
Re: Greetings whilst riding
Are you still in the 1960s. Do you not think that some old man winking at a young girl might seem slightly Creepy, to the female.Slowtwitch wrote: ↑26 Oct 2021, 10:09pm A nod is my preferred greeting, and if its a pretty girl on a bike, maybe even a wink
- 26 Oct 2021, 11:33am
- Forum: Does anyone know … ?
- Topic: Barry Hoban bike.
- Replies: 18
- Views: 1524
Re: Barry Hoban bike.
My Father and Barry were apprentice electricians together at Ardsley Colliery. when Barry announced he was leaving to go to france cycling my dad said " Why do you want do that we have a good job here"
- 26 Oct 2021, 11:02am
- Forum: Health and fitness
- Topic: Alternatives to Sugar?
- Replies: 40
- Views: 4213
Re: Alternatives to Sugar?
you good use a zero calorie drink like High five zero. replace the 3 choclate bars with a flap jack, Bananas are a great cycle food cant stand them myself but a lot of peopel dwear by them. Do you also fridge raid when you get home? have something on hand such as raw carrots or celery to munch when you get back. Also drink water or a large mug of tea on return before eating.
- 25 Oct 2021, 10:06am
- Forum: The Tea Shop
- Topic: Food Waste
- Replies: 114
- Views: 4177
Re: Food Waste
Can I borrow your cat?Mick F wrote: ↑7 Oct 2021, 8:49amWell ..........................
This morning, what did we see dead and stiff on the hearthrug in the kitchen?
Dead rat.
No doubt Nellie our cat (who is a renowned hunter-killer - but never birds, I might add) brought it in.
We ain't got a real clue where she caught it but she does have a rather large stamping ground. Dunno why she didn't eat it as she always eats what she catches. We only see the leftovers!
The tiles are 6" square ......... to give you a scale.
IMG_0814.jpg
we have just had an outbreak of rats, in the garden in garage found one in the cupboard, eating my supply of poison for the traps. I left it to finish its last meal. Another one ate the bate, and died in the middle of the Garden before I could get my shovel to remove it 2 others were attacking that one. I think the problem is we are between houses that over feed the birds. I think we are coming to end maybe one or 2 left.
- 25 Oct 2021, 9:53am
- Forum: Bikes & Bits – Technical section
- Topic: External BB bearings - worn?
- Replies: 57
- Views: 3305
Re: External BB bearings - worn?
I hate the modern bearings, there another of those spill over from racing. they purport to give more torsional stiffness, so what. it nothing your average rider is going to notice, same weight wise . main downside outboard bearing don't last anywhere near as long.Sweep wrote: ↑23 Oct 2021, 12:58pm
Another question - will also look particularly nooby, but I don't have a full set of tools with this bike and so can't easily at the moment take things apart to have a look - fair to assume that even though this bike was fitted with external bearings from the beginning by Hewitt that a full set of threads are in the BB shell so that I can i time replace the questionable external bearing jobbie with a square taper? (I have standing by a good quality Deore square taper crank set which I think is a very near relation of the DE ore external BB in there at the moment.
- 25 Oct 2021, 9:40am
- Forum: The Tea Shop
- Topic: Cycling Proficiency Test
- Replies: 30
- Views: 1140
Re: Cycling Proficiency Test
No for a number of reasons
1. it would need some form of registration scheme and Policing which would make the cost prohibitive.
2, Bike ability is available to all primary school Children
3. Cost if born by the individual would reduce the number of people cyclin
- 22 Oct 2021, 9:56am
- Forum: The Tea Shop
- Topic: TV Advertisements in Britain
- Replies: 45
- Views: 1673
Re: TV Advertisements in Britain
this thread reminded me of this Stanley Baxter impersonating George Formby.
I checked andGeorge Formby didnt do this song
"My favorites are the adverts on the Telly"
https://www.bing.com/videos/search?q=my ... &FORM=VIRE
I checked andGeorge Formby didnt do this song
"My favorites are the adverts on the Telly"
https://www.bing.com/videos/search?q=my ... &FORM=VIRE
- 20 Oct 2021, 1:55pm
- Forum: Bikes & Bits – Technical section
- Topic: Flat Pedals vs Clipless
- Replies: 55
- Views: 3586
Re: Flat Pedals vs Clipless
After reading this thread the Gearoid post over a year ago and thinking about my own situation re: foot problems, years of hotfoot trying all the combinations of foot position, pedals and shoes , I decided to give Gearoid’s suggestion ago. Its been a complete revelation, buying a set of Ethirteen pedals, which have a large foot bed, plus a pair of O’Rourke MTB shoes , combining these with an insole with a metatarsal button. And the fact I can readjust my position throughout the ride, I appear to be pain free.
There is no loss of speed or climbing ability using MTB flats compared to SPD. And certainly on longer rides I am not dealing with discomfort, or having to stop. If I want to go to the shops I can just hop on the bike in what ever shoes I am wearing. I do notice even after 3 months I still kick my heel outward when anticipating a stop. All these years of wearing first toe clips and nail on cleats through the last 20 or so year years of spuds
There is no loss of speed or climbing ability using MTB flats compared to SPD. And certainly on longer rides I am not dealing with discomfort, or having to stop. If I want to go to the shops I can just hop on the bike in what ever shoes I am wearing. I do notice even after 3 months I still kick my heel outward when anticipating a stop. All these years of wearing first toe clips and nail on cleats through the last 20 or so year years of spuds
- 19 Oct 2021, 11:36am
- Forum: The Tea Shop
- Topic: Windows 11
- Replies: 30
- Views: 1487
Re: Windows 11
Unbuntu has linux OS and has software but with a windows style front end for all the important stuff so spreadsheets documents presentations etc. not good for gaming as games are mainly windows based. its free upgrades, and it will run on PCs about five years older than the one where windows is creaking at the seamsNATURAL ANKLING wrote: ↑5 Oct 2021, 12:36pm Hi,But for a non-computer geek like myself and most users, what would you recommend?
in respect to the fact that if it's not your job that's computers et cetera, you're not being trained in it, and it's not one of your main hobbies, then do anything to do with computers mobile phones even setting up printers getting them to work wireless connections IT et cetera, is a steep learning curve.
and that's time consuming with little reward?
- 18 Oct 2021, 9:17pm
- Forum: The Tea Shop
- Topic: should politics be banned on the forum?
- Replies: 338
- Views: 15220
Re: should politics be banned on the forum?
Clues in the title, as to why I felt I might want to commentOldjohnw wrote: ↑18 Oct 2021, 5:37pmBut somehow you found your way here, even though you don’t read anything political.NUKe wrote: ↑18 Oct 2021, 5:14pm I stopped reading anything political on here a while go in the realisation that no one ever changes their mind based upon the rantings of the otherside, all I would either do is agree with other person or wind them up , so what's the point. In real life I quite happily sup with people of the opposite political persuasion, we managed to get by without politics and if it comes up we generally agree to disagree. So its easier just to ignore politics on here.