Cycling UK Forum

It's more a click click twice per revolution,anything other than an extremely light pedalling will cause it to click.

No play or roughness in bb bearing or pedals.

It's definitely coming from chainring/Bb area

I'm guessing they are rivets?

I have a creak at the BB only when pedalling hard. Wanted to check my chain ring bolts for tightness but they look like this? Are these rivets? https://uploads.tapatalk-cdn.com/20180222/8c5420dcc7aa6170d7a58c03d1cf636a.jpg I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full...

Just ordered a set of Shimano Alivio BR-T4000 from wiggle.

Thanks for all the help.

Oh and my rear derailleur cable snapped on the way home tonight.... not having much luck just now!




I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels

Thoughts on these?

https://www.ebay.co.uk/itm/272861081622

Can anyone link a half decent set, that won't brake my bank!

Would these be ok?

https://www.ebay.co.uk/itm/222739460252

Item no6 Deore dx br m600?

The cable inners and outlets are 2weeks old


I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels

Further to my broken spoke thread I have recently replaced my rear brake inner and outer cables,noodle and blocks. I also removed,cleaned and adjusted the v brake calipers springs as best I could. Now I know I need to true my rear wheel (the brake is catching on wheel) however I’d like your opinion ...

Just took spoke out. It is 264mm in length.

I notice they are cheap on eBay, how much for an average spoke at LBS?

How do I stress relieve spokes/wheel?

Yes the spoke has broken right where is it goes through the hole in the hub. So if I can remove the spoke from the nipple, I can measure the length of the spoke and replace it with the nipple still in place? In that case why would I need to know the nipple size? Sorry if those Qs seen stupid! Edit- ...

Hi guys I was in the garage replacing my rear freewheel/cassette tonight and whilst I had the wheel off I noticed one of my spokes are broken at the hub end, I replaced my rear blocks and cables 2 weeks ago and noticed the wheel was running pretty off and the brakes rubbing in a couple of points on ...

I never clean chains with any degreaser or other solution, wet weather and winter usually does a good job of clearing muck and lube off a chain so every now and then I just give them a lube of ep90. An old cloth sometimes to run the chain through to remove most surface gunk other wise just an oil u...

What do you all think of this as a chain cleaner

https://autosmart.co.uk/cg10214d-g101.html

Have you tried turning the L stop screw 1/4 of a turn anti clockwise? Thank you for all replies. I did this earlier and has cured the issue! Thanks again guys Ps what would you all reccomend I use to clean and lube my new chain? I use the bike for communing to work, 6 miles per day over some pretty...

New chain was fitted yesterday (sram)
The issue is exactly the same as with old chain (it was stretched)




I'm a trendy consumer. Just look at my wobbly bog brush using hovercraft full of eels