It is a galvanised steel cycle store.
It has a small area of paint damage on the top. As the years go by the adjacent paint edges are beginning to lift.
I have sanded down to smooth the edges,
Primer? Humbrol? Hammerite?
Paint touch-up for steel cycle store
Re: Paint touch-up for steel cycle store
I think I have answered this myself.
Hammerite "direct to galvanised metal" paint.
Hoping that it will form an effective bond with the adjacent feathered paint.
Hammerite "direct to galvanised metal" paint.
Hoping that it will form an effective bond with the adjacent feathered paint.
-
- Posts: 1208
- Joined: 21 Jan 2007, 3:13pm
Re: Paint touch-up for steel cycle store
Pretty sure you can buy a "Galvanising" paint that might be a better cosmetic match than Hammerite.
Re: Paint touch-up for steel cycle store
Screwfix do a rattle can of the stuff. Ideal for patching I would think
Whatever I am, wherever I am, this is me. This is my life
https://stcleve.wordpress.com/category/lejog/
E2E info
https://stcleve.wordpress.com/category/lejog/
E2E info
Re: Paint touch-up for steel cycle store
I used to apply this stuff commercially, it does what it says on the tin. http://www.zinga-uk.com/
-
- Posts: 3436
- Joined: 10 Jul 2014, 1:12pm
- Location: Norfolk
Re: Paint touch-up for steel cycle store
I bought this last week, but haven't tried it yet
Only 500ml, but weighs and impressive 1573g!
Salesman said he holds onto the can when he sells it in case the customer drops it
Only 500ml, but weighs and impressive 1573g!
Salesman said he holds onto the can when he sells it in case the customer drops it
-
- Posts: 3436
- Joined: 10 Jul 2014, 1:12pm
- Location: Norfolk
Re: Paint touch-up for steel cycle store
I'm not sure a zinc-rich paint is the correct paint to adhere to galvanising. It used to be a horrible yellow/buff paint called calcium plumbate (can't get it now, I guess because of the lead). It may still be available for industry (I think they use it on pylons), the modern 'equivalent' is etch primer I think.