How to make an old frame shine like new ?

General cycling advice ( NOT technical ! )
cricklewood_graeme
Posts: 41
Joined: 2 Mar 2007, 6:37pm

How to make an old frame shine like new ?

Postby cricklewood_graeme » 17 Dec 2017, 7:16pm

Has anyone got any tips on how to make a jaded frame and guards shine like new? I have a hobby based in Sweden selling second hand bikes at a street market and as there is a lot of competition from other vendors I want my bikes to stand out from the crowd. I had wondered whether T cut polish would work but haven't had the nerve to try in case it makes matters worse. I once ruined a car by using T cut which I later learned should never be used on metallic paint jobs. I guess most bike paint jobs are not metallic but I might be out of date on that.
Last edited by Graham on 18 Dec 2017, 2:55pm, edited 1 time in total.
Reason: Title : It's political correctness gorn mad

old_windbag
Posts: 1869
Joined: 19 Feb 2015, 3:55pm

Re: Primping a bike for sale

Postby old_windbag » 17 Dec 2017, 7:35pm

You can get metallic t-cut especially for such finishes. Someone I know used it to remove vandal spray paint from a silver car. It worked fine without issue as it is gentle on the surface lacquer.

I've used t-cut metal polish to renovate alloy parts( non lacqueured ), it worked very well restoring the parts back to nearly new. Even lacqueured cranks were improved.

I also use standard automotive polish such as autoglym super resin polish, you can also get a finishing polish for concourse quality but I was afraid to use it on my car in case I messed up :? .

You could also use the vinyl and rubber cleaner from autoglym to do the tyres.

User avatar
foxyrider
Posts: 5251
Joined: 29 Aug 2011, 10:25am
Location: Sheffield, South Yorkshire

Re: Primping a bike for sale

Postby foxyrider » 18 Dec 2017, 8:30am

After a good wash ordinary, cheap wax furniture polish does a fair job.
Convention? what's that then?
Airnimal Chameleon touring, Orbit Pro hack, Orbit Photon audax, Focus Mares AX tour, Peugeot Carbon sportive, Owen Blower vintage race - all running Tulio's finest!

Bonefishblues
Posts: 8797
Joined: 7 Jul 2014, 9:45pm
Location: Near Bicester Oxon

Re: Pimping a bike for sale

Postby Bonefishblues » 18 Dec 2017, 8:43am

Light cut car polish, ensuring it's suitable for hand application, is what you're after at Halfords. Meguirs is often recommended. Once polished seal with something like furniture polish.

User avatar
The utility cyclist
Posts: 3607
Joined: 22 Aug 2016, 12:28pm
Location: The first garden city

Re: Pimping a bike for sale

Postby The utility cyclist » 18 Dec 2017, 9:16am

On chrome and aluminium I use 'astonish' paste, it's cheap and gets a great finish. On paintwork it really depends on how bad it is, you don't want to take more than the grime off imho.
At the end of the day if your bikes aren't selling well compared to your competotors then there are other problems you need to consider other than purely cosmetic look of your bikes.
Good luck.

Brucey
Posts: 43043
Joined: 4 Jan 2012, 6:25pm

Re: Pimping a bike for sale

Postby Brucey » 18 Dec 2017, 9:44am

if in doubt about the suitability of a particular product, do what it usually says on the label; "trial on an inconspicuous area first".

There are so many different types of finish on various metals and various kinds of paint that there are very few products that are likely to do much good to some of them whilst being harmless to all of them.

One thing that is often worth doing with a clean but worn or weathered paint or plated finish is to apply a fresh layer of clear coat to it. Acrylic lacquer is easy to apply but doesn't last. You can get aerosol cans of two-pack lacquer (with a use-by date of a couple of weeks after they have been activated) which is a much better product, but then it should be, it is a lot more expensive.

[BTW I would have said that in the context of your question, 'primping' would indeed be more appropriate than 'pimping'...]

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~

PH
Posts: 9979
Joined: 21 Jan 2007, 12:31am
Location: Derby
Contact:

Re: Pimping a bike for sale

Postby PH » 18 Dec 2017, 10:53am

My dad used to dabble in car sales when I was a kid, it was my job to paint the tyres with something intended for it. I never understood why it made such a difference but it did.

old_windbag
Posts: 1869
Joined: 19 Feb 2015, 3:55pm

Re: Pimping a bike for sale

Postby old_windbag » 18 Dec 2017, 11:07am

In the old days :wink: , the 70's/80's, new cars used to arrive to garages covered in a coating of wax. I used to steam clean it off with a mix of water and paraffin I believe, then use standard auto polishes to valet them ready for transport to the local showroom. Very therapeutic, the finishes in those days were quite poor and flat coats would soon "oxidise" requiring the obligatory T-cut to restore the finish. But the rust would have set in before that :) , car paint finishes have come on leaps and bounds and the detailing products and bodywork fixes available are excellent.

reohn2
Posts: 40711
Joined: 26 Jun 2009, 8:21pm

Re: Pimping a bike for sale

Postby reohn2 » 18 Dec 2017, 11:12am

If you want to make bike frame paintwork and cycle parts shine use GT8,sprayed on and polished up with a soft rag,old cotton T shirts are ideal for the job :)
PS don't use it on rims with rim brakes though
-----------------------------------------------------------

mattsccm
Posts: 3678
Joined: 28 Nov 2009, 9:44pm

Re: How to make an old frame shine like new ?

Postby mattsccm » 18 Dec 2017, 8:12pm

Oily rag. Good for OPs original question and whatever the thread has deteriorated into.

Bowedw
Posts: 330
Joined: 22 Feb 2011, 10:26pm

Primping, pimping, tarts & coffee

Postby Bowedw » 19 Dec 2017, 5:56am

Mr Muscle according to some is supposed to be effective. Maybe try on a small area first.

scottg
Posts: 890
Joined: 10 Jan 2008, 8:44pm
Location: Highland Heights Kentucky,, USA

Re: How to make an old frame shine like new ?

Postby scottg » 19 Dec 2017, 5:53pm

Lemon Pledge, it is furniture cleaner/polish.
Popular with vintage bike collectors.
And it makes your bike smell lemony fresh. :)
+++++++++++++++++++++++++
Deutsche Luftschiffahrts-AG
+++++++++++++++++++++++++

mercalia
Posts: 14578
Joined: 22 Sep 2013, 10:03pm
Location: london South

Re: How to make an old frame shine like new ?

Postby mercalia » 19 Dec 2017, 7:39pm

you have had all the legit answers. now for one not so :wink: change you selling plot to some where in the shade or dark - any paintwork looks great in the dark - my old m/c looks like new then :wink: