Cunobelin wrote:Many years ago in an LBS I found one labelled... NOT to be used between Dusk and Dawn
No reference to lights, just a Do not use
Basta lights should have had that on them
Cunobelin wrote:Many years ago in an LBS I found one labelled... NOT to be used between Dusk and Dawn
No reference to lights, just a Do not use
pete75 wrote:Airsporter1st wrote:recumbentpanda wrote:I see this one as quite a sensible workaround for a real issue:
Even if, on first assembly, you tighten square taper crank bolts to the specified torque, they will need re-tightening after the bike has been ridden for a few days. This is because the hard steel of the square taper B.B. axle ‘beds in’ to the softer aluminium of the cranks.
A knowledgeable home builder will do this. A good bike shop will tell the customer to bring the bike back. In the case of a mail order bike or a shop that doesn’t bother with after sales checks, or a customer who cba to take the bike back, a sticker like that is the only logical thing.
I have dealt with a number of roadside rescues of cyclists who didn’t know this or whose bike shop didn’t tell them. A month or two later the crank loosens and gets trashed in the process.
...... which would make perfect sense if the sticker warned the rider to check for tightness after riding, but it doesn't.
If it needs tightening after riding and that's done before being next ridden it will be tightened just the same. Makes no difference when it's done as long as it's done.
Airsporter1st wrote:pete75 wrote:Airsporter1st wrote:
...... which would make perfect sense if the sticker warned the rider to check for tightness after riding, but it doesn't.
If it needs tightening after riding and that's done before being next ridden it will be tightened just the same. Makes no difference when it's done as long as it's done.
It makes a big difference -the sticker would be removed and the bolt tightened before riding, as instructed. Thereafter, with no sticker, the bolt would not be tightened again.
pete75 wrote:Airsporter1st wrote:pete75 wrote:
If it needs tightening after riding and that's done before being next ridden it will be tightened just the same. Makes no difference when it's done as long as it's done.
It makes a big difference -the sticker would be removed and the bolt tightened before riding, as instructed. Thereafter, with no sticker, the bolt would not be tightened again.
Hardly, the person removing the sticker has read it and hopefully follow it's advice. Either way it has to be removed before a pedal is fitted and if the person removing it doesn't remember to follow the instructions it matters little what it says. If they do remember then the end result will be the same.