large Rubber O rings

General cycling advice ( NOT technical ! )
Post Reply
francovendee
Posts: 3151
Joined: 5 May 2009, 6:32am

large Rubber O rings

Post by francovendee »

I have a Sigma computer that is held on by what looks like a large rubber 'O' ring. I can find small ones but need something long enough to go around a suspension fork.
I did a search for O rings and found something aimed at a certain part of the male anatomy :oops: Not at all what I need!

Any suggestions where I can get the large O rings from?
PDQ Mobile
Posts: 4659
Joined: 2 Aug 2015, 4:40pm

Re: large Rubber O rings

Post by PDQ Mobile »

Camping and caravanning centers often keep boxes of assorted sizes.
User avatar
[XAP]Bob
Posts: 19800
Joined: 26 Sep 2008, 4:12pm

Re: large Rubber O rings

Post by [XAP]Bob »

Plumbing fittings?
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
Brucey
Posts: 44643
Joined: 4 Jan 2012, 6:25pm

Re: large Rubber O rings

Post by Brucey »

if you google 'cat-eye spare fixing bands' you will find the very similar parts for securing many models of cat-eye light etc. eg.

https://www.tredz.co.uk/cateye-brackets-and-spares

These parts are (unlike many O rings) allegedly made of weather-resistant rubber. However I think there may be better quality parts out there.

You can buy O ring seals from specialist vendors, plumbing merchants and on e-bay. FWIW you can buy (say) a cheap push-fit waste fitting which will contain two O rings of about 40mm diameter for about a quid.

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
User avatar
Redvee
Posts: 2469
Joined: 8 Mar 2010, 8:58pm

Re: large Rubber O rings

Post by Redvee »

[XAP]Bob wrote:Plumbing fittings?


That was the suggestion when I went looking for spares for mine, I walked past the heating shop opposite my flat, where I ended up buying them to get to the bike shop to be told to go back where I'd came from.
User avatar
hujev
Posts: 133
Joined: 19 Jun 2015, 7:45pm
Location: Lake Superior, North America
Contact:

Re: large Rubber O rings

Post by hujev »

Warning: useless wisecrack reply.

This is what I immediately thought of from the subject:
Image
Dr. Feynman dug into the task. The pivotal moment in the investigation came on February 11, 1986, when, on national television, Dr. Feynman held up sample material of the “O-ring” rubber gasket from one of the shuttle’s solid-fuel booster rockets and dropped it into his glass of ice water. The demonstration illuminated Dr. Feynman’s theory that the gasket lost resiliency at freezing temperatures – thus allowing gases to escape and the shuttle to explode.
gxaustin
Posts: 890
Joined: 23 Sep 2015, 12:07pm

Re: large Rubber O rings

Post by gxaustin »

Google O ring seals - you'll avoid c**k rings that way. They are usually nitrile rubber so shouldn't perish quickly.
landsurfer
Posts: 5327
Joined: 27 Oct 2012, 9:13pm

Re: large Rubber O rings

Post by landsurfer »

Just go to your local hose and hydraulics company .. There are hundreds of them in the UK ... They will sell them for pennies
“Quiet, calm deliberation disentangles every knot.”
Be more Mike.
The road goes on forever.
landsurfer
Posts: 5327
Joined: 27 Oct 2012, 9:13pm

Re: large Rubber O rings

Post by landsurfer »

gxaustin wrote:Google O ring seals - you'll avoid c**k rings that way. They are usually nitrile rubber so shouldn't perish quickly.


Viton last a lot longer .. And cost no more ..
First 10 pm's get a pack of 10 foc .... Just let me know the name of the mount ... Garmin etc...
“Quiet, calm deliberation disentangles every knot.”
Be more Mike.
The road goes on forever.
gxaustin
Posts: 890
Joined: 23 Sep 2015, 12:07pm

Re: large Rubber O rings

Post by gxaustin »

Viton last a lot longer .. And cost no more ..


Even better
Brucey
Posts: 44643
Joined: 4 Jan 2012, 6:25pm

Re: large Rubber O rings

Post by Brucey »

'Viton' covers a range of different fluoroelastomer compounds, which vary in their performance considerably. There is a guide here

http://rainierrubber.com/wp-content/uploads/2014/01/Viton-Selection-Guide.pdf

one of the aspects in which the compounds vary is in 'compression set resistance' which relates to the way the O ring is permanently deformed out of shape when installed. This may also relate to its elasticity when used as a tension rubber. However most viton grades are also more UV resistant than other rubbers, so overall even the least good viton grade may be a better choice for this use.

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
AMMoffat
Posts: 242
Joined: 1 Dec 2007, 1:05pm

Re: large Rubber O rings

Post by AMMoffat »

I joined 2 smaller rubber o rings together to fit a Sigma transmitter to my suspension forks.
Post Reply