Cordless Compressors
Cordless Compressors
I have a long term problem with one of my wrists that has flared up again and it makes using my track pump very difficult. I am thinking of getting a cordless compressor. Does anyone have any experience of using one with bike tyres? I'm looking specifically at a Makita DMP180Z as I already have Makita LXT 18v batteries and charger and I find Makita tools to be very good.
- simonineaston
- Posts: 8062
- Joined: 9 May 2007, 1:06pm
- Location: ...at a cricket ground
Re: Cordless Compressors
I've no experience, but I agree Makita tend to be a good buy, being on the whole, tough and effective tools. I see the bare tool (no battery / charger) is available at around £50 here in UK, although I have a vague memory that the OP is based in France. see here
S
(on the look out for Armageddon, on board a Brompton nano & ever-changing Moultons)
(on the look out for Armageddon, on board a Brompton nano & ever-changing Moultons)
Re: Cordless Compressors
Max pressure from the device is around 120psi. So, unless you're track-racing, its more than enough. The control allows the required pressure to be set before pumping up the tyre, so the correct pressure is easily achieved. There appears to be a scale covering PSI and Bar (the more common scales for tyre pressures).
For your needs, it sounds ideal. Price seems good if you have the required batteries around from other devices.
- Nigel
For your needs, it sounds ideal. Price seems good if you have the required batteries around from other devices.
- Nigel
-
- Posts: 36778
- Joined: 9 Jan 2007, 2:44pm
Re: Cordless Compressors
No experience of this but a query like this tends to have me looking at Amazon reviews and similar. From their, I get the impression that some users have been caught out by different versions of the LXT battery so I'd recommend checking that carefully. My general doubts about using inflators not specifically targeted at bike tyres is whether they can cope with high pressures but the reviews seem to suggest that this one is better at small volume high pressure than large volume low pressure applications.
Re: Cordless Compressors
120psi on my Mercian rear is 120psi, so not "more than enough".
Chap down the road from us, I saw inflating his car tyres a week or so ago. Until then, I didn't know electric cordless tyre inflators existed.
Mick F. Cornwall
Re: Cordless Compressors
It's more than enough for normal people riding normal bikes with normal tyres at manufacturers' recommended pressures.
Re: Cordless Compressors
I think it is sufficient for 99% of riders. My Roberts, 28mm tyres, is 75-80psi on the rear.
Re: Cordless Compressors
Whatever.
I'm just commenting on the "more than enough" statement.
Vittoria Rubino Pro 23mm on 531c Mercian.
85psi front, and 120psi rear.
The tyres will take 145psi.
I'm just commenting on the "more than enough" statement.
Vittoria Rubino Pro 23mm on 531c Mercian.
85psi front, and 120psi rear.
The tyres will take 145psi.
Mick F. Cornwall
Re: Cordless Compressors
145psi is also more than enough.
Re: Cordless Compressors
I bought one a while ago for the car tyres. It was about £30 or so from Amazon on a deal
Tried it on the wife's ebike as that has schrader valves and it took them up to 70psi quickly and easily.
There's a nice little display and you can set the pressure limit in psi or bar and it auto shuts off.
A cracking little device
Tried it on the wife's ebike as that has schrader valves and it took them up to 70psi quickly and easily.
There's a nice little display and you can set the pressure limit in psi or bar and it auto shuts off.
A cracking little device
-
- Posts: 36778
- Joined: 9 Jan 2007, 2:44pm
Re: Cordless Compressors
Will it mount an a bike frame or does it need to go in a pannier etc?
Re: Cordless Compressors
Most of this is already in the discussion, but here's how I'd approach this.iandusud wrote: ↑16 Jun 2021, 8:01am I have a long term problem with one of my wrists that has flared up again and it makes using my track pump very difficult. I am thinking of getting a cordless compressor. Does anyone have any experience of using one with bike tyres? I'm looking specifically at a Makita DMP180Z as I already have Makita LXT 18v batteries and charger and I find Makita tools to be very good.
1 Decide the maximum pressure that you need.
2 Also have a look at dedicated inflators that will provide that pressure. Many of these need 12V DC so if you'll always be near a car or mains that will be OK...
3 Yes, Makita battery tools are excellent, and sharing the battery and charger will reduce cost and pollution.
4 Don't assume that any built-in gauge is accurate.
Jonathan
-
- Posts: 2234
- Joined: 22 May 2011, 7:14pm
Re: Cordless Compressors
The Makita looks a good bet. If you ever decide to get a smaller more portable dedicated electric pump, Bosch do one. We have one at work. It's ok, pretty noisy and slow but it works, and is pretty light.
https://www.tooled-up.com/bosch-easypum ... m8QAvD_BwE
It goes to 150psi, which should be more than enough for almost everybody's standards.
https://www.tooled-up.com/bosch-easypum ... m8QAvD_BwE
It goes to 150psi, which should be more than enough for almost everybody's standards.