I did about 30 miles today down to SE London on my MTB tourer, which is fitted with butterfly bars.
I just have foam on the bars and it is not enough. On the way back through central London, I was being raced along the Cycle Super Highway all the way from Limehouse to Westminster, so I pushed it hard. Now my hands hurt a bit.
I was thinking a pair of Ergon GP1 grips would be good.
Whichever grips I get, I have got to fit them on the butterfly bar outwards first. So they also need to be completely hollow (ie not blocked at the outward end).
Any thoughts?
Grips for butterfly bars
Grips for butterfly bars
Daily: Carlton Courette 1982 mixte 42, 32, 22 x7
Van Nicholas Yukon titanium 50/34 10sp
Lazzaretti steel 1996 10sp 48/34
Trek 1.7 10sp 3x 2010;
Ciocc steel 1984 50/34x7
Marin Bolinas Ridge MTB c1995, 7x42, 34, 24
Scott Scale carbon MTB 27.5 inch
Van Nicholas Yukon titanium 50/34 10sp
Lazzaretti steel 1996 10sp 48/34
Trek 1.7 10sp 3x 2010;
Ciocc steel 1984 50/34x7
Marin Bolinas Ridge MTB c1995, 7x42, 34, 24
Scott Scale carbon MTB 27.5 inch
Re: Grips for butterfly bars
My commuter has these bars, bought them as I thought of using them on a touring bike and went back to drops.
On the commuter, I used generic ergo type grips, but found that due to the curve, which restricts how far out to the outer sides the grips can actually slide out to, I had to cut the grips down so as not to have the brake levers and trigger shifters not too far inwards.
I've put trekking bars on my wifes bike, and she likes them. I did however forego grips and simply double wrapped the bars, and it works well for her.
what i find a bit annoying with the grips is that using them, I find my hands a bit too far inboard, so to speak. Going gripless allows you to be more adjusting with where you place your hands.
Just my view.
no matter what you try, you'll see that the curve is a limiting factor, but by all means, try some and see, but be prepared to go back to just double wrapped bar tape if you find you prefer more free positioning of your hands.
Personally, from how your wrote your question, it sounds like you perhaps should live with the bars as is for a while.
Double wrapping is easy to do, and you can use old bar tape for the underlayer.
good luck experimenting and living with options for a while. At least changing stuff is relatively quick.
On the commuter, I used generic ergo type grips, but found that due to the curve, which restricts how far out to the outer sides the grips can actually slide out to, I had to cut the grips down so as not to have the brake levers and trigger shifters not too far inwards.
I've put trekking bars on my wifes bike, and she likes them. I did however forego grips and simply double wrapped the bars, and it works well for her.
what i find a bit annoying with the grips is that using them, I find my hands a bit too far inboard, so to speak. Going gripless allows you to be more adjusting with where you place your hands.
Just my view.
no matter what you try, you'll see that the curve is a limiting factor, but by all means, try some and see, but be prepared to go back to just double wrapped bar tape if you find you prefer more free positioning of your hands.
Personally, from how your wrote your question, it sounds like you perhaps should live with the bars as is for a while.
Double wrapping is easy to do, and you can use old bar tape for the underlayer.
good luck experimenting and living with options for a while. At least changing stuff is relatively quick.
- matt2matt2002
- Posts: 1130
- Joined: 25 Oct 2009, 7:45pm
- Location: Aberdeen Scotland UK
Re: Grips for butterfly bars
I had foam on my second hand Thorn Raven Tour butterfly bars.
Quite happy with the bar shape but when the foam needed replacing I found that it had been glued on so well I was unable to remove it easily. It became one of those jobs that multiplied in complexity as I struggled to solve the issue.
Long story but I ended up going back to straight bars.
Good luck. I hope your foam slides off
Quite happy with the bar shape but when the foam needed replacing I found that it had been glued on so well I was unable to remove it easily. It became one of those jobs that multiplied in complexity as I struggled to solve the issue.
Long story but I ended up going back to straight bars.
Good luck. I hope your foam slides off
2017 Ethiopia.5 weeks.
2018 Marrakech 2 weeks.
2023 Thailand 8 weeks.
Always on a Thorn Raven/Rohloff hub.
2018 Marrakech 2 weeks.
2023 Thailand 8 weeks.
Always on a Thorn Raven/Rohloff hub.
Re: Grips for butterfly bars
I've fitted Ergon GL-1 on mine, there's a small lip that requires removing, but they go quite a long way on to the bar, enough to get the shifter and a bell on.
A novice learning...
“the dreamers of the day are dangerous men, for they may act their dreams with open eyes, to make it possible.”
“the dreamers of the day are dangerous men, for they may act their dreams with open eyes, to make it possible.”
Re: Grips for butterfly bars
I fitted these Ergon GP1’s after getting significant hand pain after a tour where I just had the foam sleeves on my bars.
I shortened the grips ever so slightly (around 1cm) to allow room for my brakes and gear changers. Shortening them also removed the lip mentioned in an earlier post (though this lip can be filed away easily enough if you don’t need to shorten them).
The GP1’s are really comfortable and I found the increased comfort more than offsets any negatives. I’d highly recommend them.
I shortened the grips ever so slightly (around 1cm) to allow room for my brakes and gear changers. Shortening them also removed the lip mentioned in an earlier post (though this lip can be filed away easily enough if you don’t need to shorten them).
The GP1’s are really comfortable and I found the increased comfort more than offsets any negatives. I’d highly recommend them.
Last edited by Bullsnut on 25 Mar 2021, 6:32pm, edited 1 time in total.
- simonineaston
- Posts: 8076
- Joined: 9 May 2007, 1:06pm
- Location: ...at a cricket ground
Re: Grips for butterfly bars
I have had Ergon grips and can confirm that they are good for at least another mile per hour - boy will those racers regret they ever picked on you!!I was thinking a pair of Ergon GP1 grips would be good.
S
(on the look out for Armageddon, on board a Brompton nano & ever-changing Moultons)
(on the look out for Armageddon, on board a Brompton nano & ever-changing Moultons)