pete75 wrote:Just looked at it again and it was an old Simplex not Sachs QR I used. Just removed the cam lever supplied along with the rod and replaced them with the same from one of the old QR mechs I had in the garage which just happened to be Simplex, thought it was the Sachs I'd picked up. Don't suppose teh dimensions change much on any of the Camapag copy type QR levers. The closest would probably be Shimano as that is most likely what the trailer manufacturer has made an inferior copy of. I've a steel Shimano QR spare somewhere so will try that one as well - unused so nice and shiny too...
.....
The bit that interests me is the bolt on the end of the lever. I had toyed with use the rod from another QR skewer but the ones I have use a circlip spring ring on the end, which would mean drilling out the body of the nasty QR.