Hi,
I have just finished fixing my friend's KMX. I had a big problem - it was impossible to get a pump onto the valves on the front wheel.
However I found this on SJS cycles' website! :
http://www.topeak.com/products/Pumps/Pressure-Rite.
It is a screw on attachment for car size valves which bends 90º so that you can pump it up as normal. I don't know however if KMX had a different idea when they designed this wheels, as to how you could inflate them.
But anyway problem solved and an idea if you're stuck with it a the moment or might be in the future.
All the best,
Allydoug
Pumping-up KMX tyres
Re: Pumping-up KMX tyres
Never had a problem with mine I use a Joeblow track pump
Re: Pumping-up KMX tyres
The kiddie ones Ar 12" wheels or so....
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
There are two kinds of people in this world: those can extrapolate from incomplete data.
Re: Pumping-up KMX tyres
www.getcycling.org.uk/bike-shop-york/
-
bryan.fanson1
- Posts: 30
- Joined: 22 Apr 2015, 7:58am
Re: Pumping-up KMX tyres
My son's K-3 was supplied with a flexible connector similar to a traditional pump but with a schrader male on one end to fit the track pump.
I'm a trendy consumer. Just look at my D6603 using hovercraft full of eels.
I'm a trendy consumer. Just look at my D6603 using hovercraft full of eels.
Last edited by bryan.fanson1 on 27 Nov 2016, 8:49am, edited 3 times in total.