Garmin 810 and ICE sprint trike

DIscuss anything relating to non-standard cycles and their equipment.
Post Reply
nicchristie
Posts: 11
Joined: 18 Mar 2015, 1:47am
Location: Portsmouth UK
Contact:

Garmin 810 and ICE sprint trike

Post by nicchristie »

Ok you clever Trike riders. Pictures and advice please on where and how it’s best to stick my Garmin edge... err keep it clean please ;-)
User avatar
Cunobelin
Posts: 10801
Joined: 6 Feb 2007, 7:22pm

Re: Garmin 810 and ICE sprint trike

Post by Cunobelin »

nicchristie wrote:Ok you clever Trike riders. Pictures and advice please on where and how it’s best to stick my Garmin edge... err keep it clean please ;-)


There is an adaptor from Icletta that allow you fo mount on the headset

This is the end result on my Gekko

Image

Image
nicchristie
Posts: 11
Joined: 18 Mar 2015, 1:47am
Location: Portsmouth UK
Contact:

Re: Garmin 810 and ICE sprint trike

Post by nicchristie »

Wow thanks for the fast response I shall see if I can find one on the web
nicchristie
Posts: 11
Joined: 18 Mar 2015, 1:47am
Location: Portsmouth UK
Contact:

Re: Garmin 810 and ICE sprint trike

Post by nicchristie »

hhuuummm can't see on their site ?can you send a link? :D please
User avatar
Tigerbiten
Posts: 2503
Joined: 29 Jun 2009, 6:49am

Re: Garmin 810 and ICE sprint trike

Post by Tigerbiten »

I extended the derailleur post as a support for my Streamer fairing.
As it ends just below eye height, I stuck my Garmin mount on the end of the extension.
User avatar
[XAP]Bob
Posts: 19793
Joined: 26 Sep 2008, 4:12pm

Re: Garmin 810 and ICE sprint trike

Post by [XAP]Bob »

I strapped to the support for the mudguard
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
User avatar
Cunobelin
Posts: 10801
Joined: 6 Feb 2007, 7:22pm

Re: Garmin 810 and ICE sprint trike

Post by Cunobelin »

nicchristie wrote:hhuuummm can't see on their site ?can you send a link? :D please


Sorry - my fault, it was Recumbent Parts not Icletta
Post Reply