Any AZUB trike owners out there?

DIscuss anything relating to non-standard cycles and their equipment.
hercule
Posts: 1043
Joined: 5 Feb 2011, 5:18pm

Re: Any AZUB trike owners out there?

Postby hercule » 16 Mar 2020, 6:54pm

Or just be a skinflint like me and use a cut down MTB bar end (though you will have to spread the clamp a bit to get it past the internally routed cables when you’re installing it)

UpWrong
Posts: 1054
Joined: 31 May 2009, 12:16pm
Location: Portsmouth, Hampshire

Re: Any AZUB trike owners out there?

Postby UpWrong » 16 Mar 2020, 10:52pm

Yes, @£32. The Busch & Muller cycle star mirrors come with a clamp that should work, about £18.

Grldtnr
Posts: 26
Joined: 11 Jun 2020, 7:04pm

Re: Any AZUB trike owners out there?

Postby Grldtnr » 12 Jun 2020, 11:13am

Coming late to this discussion, but recently bought a Tri Tris 26,
For mirrors ,I went to my local motorcycle factors, and bought some from there,a pair for about £20,seems good quality made from metal.
They fit on the inserts to the handle bars ,lifted up the gear triggers,they fitted snuggly on a 2 pt bracket
Will post pics later.

UpWrong
Posts: 1054
Joined: 31 May 2009, 12:16pm
Location: Portsmouth, Hampshire

Re: Any AZUB trike owners out there?

Postby UpWrong » 13 Jun 2020, 10:40am

Grldtnr wrote:Coming late to this discussion, but recently bought a Tri Tris 26,
For mirrors ,I went to my local motorcycle factors, and bought some from there,a pair for about £20,seems good quality made from metal.
They fit on the inserts to the handle bars ,lifted up the gear triggers,they fitted snuggly on a 2 pt bracket
Will post pics later.

I look forward to seeing some photos. Since I posted I've added the SKS bottle cage mount on the main frame tube, and changed the tyres to 38-406 Maxxis DTH. I disklike the cable loops aesthetically, so might still fit a bar-end shifter on the left and reverse the twist grip on the right but that won't be so good ergonomically.

Still very happy with my T-Tris20 and had zero problems with it.

Trikeyohreilly
Posts: 433
Joined: 16 Dec 2010, 6:06pm

Re: Any AZUB trike owners out there?

Postby Trikeyohreilly » 14 Jun 2020, 7:34am

I can't recomend bar end shifters enough. They are fairly expensive but worth it. I run mine in friction mode and always find the gear I'm looking for. This also means I can buy cheaper 8 speed versions that work fine with my 9 speed set up.

Plus one on the bar ends. I didn't spread the clamp though. Just removed the bar ends to fit.
Last edited by Trikeyohreilly on 14 Jun 2020, 7:39am, edited 1 time in total.

Trikeyohreilly
Posts: 433
Joined: 16 Dec 2010, 6:06pm

Re: Any AZUB trike owners out there?

Postby Trikeyohreilly » 14 Jun 2020, 7:37am

Run mine like this. Looks meager but I find I need no foam or grip on the "handle bar" though in very cold weather without gloves i can feel the cold of the metal.
Image Attachments
20200614_073443.jpg

UpWrong
Posts: 1054
Joined: 31 May 2009, 12:16pm
Location: Portsmouth, Hampshire

Re: Any AZUB trike owners out there?

Postby UpWrong » 14 Jun 2020, 7:57am

The B&M cycle star mirror is working fine strapped to the side at the top of the handlebar.It's out of the way of spray from the wheel too which is another consideration when positioning a mirror:
IMG_20200411_172516.jpg

UpWrong
Posts: 1054
Joined: 31 May 2009, 12:16pm
Location: Portsmouth, Hampshire

Re: Any AZUB trike owners out there?

Postby UpWrong » 14 Jun 2020, 8:01am

IMG_20200411_172539.jpg

UpWrong
Posts: 1054
Joined: 31 May 2009, 12:16pm
Location: Portsmouth, Hampshire

Re: Any AZUB trike owners out there?

Postby UpWrong » 15 Aug 2020, 3:33pm

I've been having problems with changing gear on the rear wheel. It's become very imprecise, particularly when changing up into 8th on the 9 gear cassette.The problems seemed to coincide with changing the rear wheel back to the OEM disc wheel but even if that had a slightly different hub or dish that doesn't explain why adjusting the gear cable wouldn't fix it.

So this morning I decided to check the RD alignment and remove and lubricate the gear cable. The alignment was slightly out in the vertical plane, consistent with the RD getting an inward knock. I corrected the alignment, lubricated the gear cable, reassembled, put the trike on a stand and set to work setting up the gear change from scratch. No joy. It struggles to shift down from 4 to 5, yet sticks in 1st when I try to shift to second. Frustrating when SRAM X series is usually so reliable. I could try unscewing the B-screw but I had an issue with the derailleur knuckle catching on the chain stay when the screw was too far undone.

What to do? I guess it's time to install bar ends and to reverse the brake levers. I'll need to revert to a Shimano RD, i have an old 9 speed long cage Deore RD. Could probably do with then shortening the cables which is going to be a pain. And recheck the hanger alignment.

User avatar
n0ct0
Posts: 41
Joined: 27 Apr 2020, 2:11pm

Re: Any AZUB trike owners out there?

Postby n0ct0 » 15 Aug 2020, 5:26pm

I feel your pain. I had a similar experience, lined up the RD hanger only to find that the RD was also bent, hence the ongoing problems.

UpWrong
Posts: 1054
Joined: 31 May 2009, 12:16pm
Location: Portsmouth, Hampshire

Re: Any AZUB trike owners out there?

Postby UpWrong » 17 Aug 2020, 7:14am

I think I've sorted the problem. There was a brake ferule terminating the cable at the twist grip end and this was inhibiting adjustment. I trimmed the end of the outer cable and fitted a metal gear cable ferrule. I put the trike on the stand and soon had it changing smoothly up and down the entire cassette.

nigelnightmare
Posts: 699
Joined: 19 Sep 2016, 10:33pm

Re: Any AZUB trike owners out there?

Postby nigelnightmare » 20 Aug 2020, 10:10am

Glad you got it sorted.