Does anyone know how I can attach a pair of crutches to an ICE Qnt with mesh seat and rear rack fitted.
Must be secure but easy to get at.
TIA.
Crutches on trike
Re: Crutches on trike
Quickest and easiest....
A couple of "Broom cilps" - choose ones that fit the crutches securely
Bend the fixing plate to to fit the crossbar of the seat, and then fix in place with a Jubilee clip. One on the upper bar, and one on the lower bar
The crutch just clips on and is held securely. If you want additional security, a cinch strap will offer all you need.
If this is unsuitable, I have other options
A couple of "Broom cilps" - choose ones that fit the crutches securely
Bend the fixing plate to to fit the crossbar of the seat, and then fix in place with a Jubilee clip. One on the upper bar, and one on the lower bar
The crutch just clips on and is held securely. If you want additional security, a cinch strap will offer all you need.
If this is unsuitable, I have other options
-
- Posts: 709
- Joined: 19 Sep 2016, 10:33pm
Re: Crutches on trike
Thanks @Cunobelin
I've gone for these that I found on eBay.
https://www.ebay.co.uk/itm/Walking-Stick-Crutch-Holder/223918534151?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
I'll give an update after they're fitted & tested.
I've gone for these that I found on eBay.
https://www.ebay.co.uk/itm/Walking-Stick-Crutch-Holder/223918534151?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
I'll give an update after they're fitted & tested.