Trike swaps...
Posted: 9 Aug 2020, 7:57pm
Anyone who has a vortex and wants something a little more practical?
I’m no longer commuting, and I can’t see myself commuting again in the coming years...
So, I have a Sprint 2RS (rear suspension, 20” all round trike, with a plethora of accessories that make this as close to the ultimate commuting machine as you’ll get without going to a full velo...
And I’m considering moving to something more “sport” than “transport”, since my cycling is now limited.
I should probably drop DTek a line to be honest...
- rear suspension
- hub dynamo (SON) on left (*)
- cable disc brakes
- mudguards all round (and a brand new spare front set)
- part suspended rack, with sides
- standard chainset (*)
- Tryker tyres (and spares)
- Headlight as supplies by ICE
- Tail light on rack
- Tail light on outside mudguard
- 9spd Shimano cassette (not freewheel) rear wheel motor, controller and battery (right hand twist throttle)
- Also have an SA 3*9 rear hub laced into a 20” wheel
- Mesh seat (just the basic one), with home made rain cover
- Radical medium side pods
- Dual RVM - one flat, one wide view
- Front and rear facing camera (powered from USB (currently powered from the spare outputs on the motor controller) might be included if wanted.
- Frame lock with integrated cable attached to rear V bosses.
Probably some other bits I’m just so used to seeing I do t notice them any more
I’m no longer commuting, and I can’t see myself commuting again in the coming years...
So, I have a Sprint 2RS (rear suspension, 20” all round trike, with a plethora of accessories that make this as close to the ultimate commuting machine as you’ll get without going to a full velo...
And I’m considering moving to something more “sport” than “transport”, since my cycling is now limited.
I should probably drop DTek a line to be honest...
- rear suspension
- hub dynamo (SON) on left (*)
- cable disc brakes
- mudguards all round (and a brand new spare front set)
- part suspended rack, with sides
- standard chainset (*)
- Tryker tyres (and spares)
- Headlight as supplies by ICE
- Tail light on rack
- Tail light on outside mudguard
- 9spd Shimano cassette (not freewheel) rear wheel motor, controller and battery (right hand twist throttle)
- Also have an SA 3*9 rear hub laced into a 20” wheel
- Mesh seat (just the basic one), with home made rain cover
- Radical medium side pods
- Dual RVM - one flat, one wide view
- Front and rear facing camera (powered from USB (currently powered from the spare outputs on the motor controller) might be included if wanted.
- Frame lock with integrated cable attached to rear V bosses.
Probably some other bits I’m just so used to seeing I do t notice them any more