Grasshopper sturmey Archer hub gear

DIscuss anything relating to non-standard cycles and their equipment.
User avatar
NUKe
Posts: 3991
Joined: 23 Apr 2007, 11:07pm
Location: Suffolk

Grasshopper sturmey Archer hub gear

Postby NUKe » 3 Nov 2020, 2:17pm

Does anyone posses a HP velotechnic, with the Sturmey archer 3x8 hub ?
just wondering how the cable stop is fitted ? that is the mount where the cable outer Stops.

My SRAM DD3 died And I have purchase the Sturmey Archer RF-CK3 , on the older models like mine there is a 3M bolt screwed into the underside of the Seat Stay. about six inches away from the hub.
NUKe
_____________________________________

User avatar
[XAP]Bob
Posts: 17971
Joined: 26 Sep 2008, 4:12pm

Re: Grasshopper sturmey Archer hub gear

Postby [XAP]Bob » 3 Nov 2020, 6:53pm

On my ICE I used a band on stop (as used to be common) which is positioned against the V Brake bosses or a cable mount IIRC - it isn't going to go anywhere anyway
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.

User avatar
Tilley
Posts: 139
Joined: 19 Jun 2016, 4:54pm
Location: Nailsea

Re: Grasshopper sturmey Archer hub gear

Postby Tilley » 3 Nov 2020, 7:51pm

You could fit a Sturmey Archer Axle Fulcrum Lever with Washer - HSJ905

User avatar
NUKe
Posts: 3991
Joined: 23 Apr 2007, 11:07pm
Location: Suffolk

Re: Grasshopper sturmey Archer hub gear

Postby NUKe » 3 Nov 2020, 8:01pm

Cheers Bob and Tilley good ideas, It looks like there is a ready made drilling on the frame with a m3 bolt. The bike doctor I am buying off thinks he has clamp to fit will let you know how I go.
NUKe

_____________________________________

User avatar
n0ct0
Posts: 41
Joined: 27 Apr 2020, 2:11pm

Re: Grasshopper sturmey Archer hub gear

Postby n0ct0 » 4 Nov 2020, 10:35am

IMG_3651.jpg
IMG_3650.jpg
IMG_3649.jpg

User avatar
NUKe
Posts: 3991
Joined: 23 Apr 2007, 11:07pm
Location: Suffolk

Re: Grasshopper sturmey Archer hub gear

Postby NUKe » 4 Nov 2020, 10:48am

n0ctO

thank you perfect
regards NUke
NUKe

_____________________________________

User avatar
NUKe
Posts: 3991
Joined: 23 Apr 2007, 11:07pm
Location: Suffolk

Re: Grasshopper sturmey Archer hub gear

Postby NUKe » 29 Nov 2020, 9:10pm

0D7499B5-45FE-42B3-9D1E-A732D8D6DBB3.jpeg

Finally finished used a barrel adjuster screwed into the old cable guide. Thanks for the help guys
NUKe

_____________________________________