Does anyone posses a HP velotechnic, with the Sturmey archer 3x8 hub ?
just wondering how the cable stop is fitted ? that is the mount where the cable outer Stops.
My SRAM DD3 died And I have purchase the Sturmey Archer RF-CK3 , on the older models like mine there is a 3M bolt screwed into the underside of the Seat Stay. about six inches away from the hub.
Grasshopper sturmey Archer hub gear
Grasshopper sturmey Archer hub gear
NUKe
_____________________________________
_____________________________________
Re: Grasshopper sturmey Archer hub gear
On my ICE I used a band on stop (as used to be common) which is positioned against the V Brake bosses or a cable mount IIRC - it isn't going to go anywhere anyway
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.
There are two kinds of people in this world: those can extrapolate from incomplete data.
Re: Grasshopper sturmey Archer hub gear
You could fit a Sturmey Archer Axle Fulcrum Lever with Washer - HSJ905
Re: Grasshopper sturmey Archer hub gear
Cheers Bob and Tilley good ideas, It looks like there is a ready made drilling on the frame with a m3 bolt. The bike doctor I am buying off thinks he has clamp to fit will let you know how I go.
NUKe
_____________________________________
_____________________________________
Re: Grasshopper sturmey Archer hub gear
n0ctO
thank you perfect
regards NUke
thank you perfect
regards NUke
NUKe
_____________________________________
_____________________________________
Re: Grasshopper sturmey Archer hub gear
Finally finished used a barrel adjuster screwed into the old cable guide. Thanks for the help guys
NUKe
_____________________________________
_____________________________________