Pictures of your recumbent

DIscuss anything relating to non-standard cycles and their equipment.
ONETAL
Posts: 16
Joined: 3 Oct 2018, 10:51am

Pictures of your recumbent

Postby ONETAL » 12 Oct 2018, 9:09am

It's more fun on 3 wheels than 2. ICE VTX+ with custom paint job
download/file.php?mode=view&id=54572
Image Attachments
WP_20180630_001.jpg
Last edited by ONETAL on 12 Oct 2018, 12:06pm, edited 1 time in total.

ONETAL
Posts: 16
Joined: 3 Oct 2018, 10:51am

Pictures of your recumbent

Postby ONETAL » 12 Oct 2018, 9:13am

Performer Cantus Carbon.
download/file.php?mode=view&id=54573
Image Attachments
WP_20180822_001 1.jpg

neil earley
Posts: 32
Joined: 4 Nov 2010, 2:32pm

Re: Pictures of your recumbent

Postby neil earley » 15 Oct 2018, 12:27am

A review on the carbon cantus please

ONETAL
Posts: 16
Joined: 3 Oct 2018, 10:51am

Re: Pictures of your recumbent

Postby ONETAL » 15 Oct 2018, 10:46am

After playing around with the bars and stems to get the steering right (taking a hacksaw to them), and changing the seat to a Thor Trike seat (the Performer seat is far to narrow) it's a lot of fun. It's very light for a trike even with the 5 spoke rear wheel,the frame looks to be very well made but there is a bit of flex in the stays when pushing hard on the peddles, but it still climbs hills better than the VTX. I've had it up to 46m.p.h when descending and was still stabile. It's got a pretty tight turning circle so good it tight spaces. I don't get on with compact chainsets so I've changed it to a Campag Athena triple with 30/39/52 rings much better for me. The hub bearings are smooth to let the wheels spin up to speed. I've not had time to do a long ride yet (over 60mile) but after all the modifications I prefer it to the VTX so far. And it looks pretty dam fine as well.

neil earley
Posts: 32
Joined: 4 Nov 2010, 2:32pm

Re: Pictures of your recumbent

Postby neil earley » 15 Oct 2018, 10:36pm

Nice reviewI and have to say it looks superb mm a Youtube video would be cool :D :D :D

ONETAL
Posts: 16
Joined: 3 Oct 2018, 10:51am

Re: Pictures of your recumbent

Postby ONETAL » 17 Oct 2018, 11:56am

Sorry Neil youtube video is to technical for me.

neil earley
Posts: 32
Joined: 4 Nov 2010, 2:32pm

Re: Pictures of your recumbent

Postby neil earley » 18 Oct 2018, 12:20am

Nooo lol never mind a review would be nice when you start riding it for a few months :D

ONETAL
Posts: 16
Joined: 3 Oct 2018, 10:51am

Re: Pictures of your recumbent

Postby ONETAL » 18 Oct 2018, 8:37am

I'm in Durham when you are passing give me a knock if I'm not in the key is under the mat, you can have a ride on it.

neil earley
Posts: 32
Joined: 4 Nov 2010, 2:32pm

Re: Pictures of your recumbent

Postby neil earley » 18 Oct 2018, 10:38am

If your in S.Wales some.nice trike trails I will join you wither.my Srprint x e assist ps may take you up on your offer sometime

Marc
Posts: 56
Joined: 18 Aug 2016, 6:03pm
Location: Hamburg, Germany
Contact:

Re: Pictures of your recumbent

Postby Marc » 21 Oct 2018, 10:05pm

Picked-up a used Milan GT MkII yesterday. :)

Image

The lighting system need's a complete redo, the drive train (36/57t chain rings, 9-speed, dual drive) has to go and it needs at least one big hole cut in its side to properly work on the derailleur. If it gets a rear parking brake, I'll cut holes for maintenance on either side.
Last edited by Marc on 22 Oct 2018, 4:52pm, edited 1 time in total.

User avatar
[XAP]Bob
Posts: 16858
Joined: 26 Sep 2008, 4:12pm

Re: Pictures of your recumbent

Postby [XAP]Bob » 22 Oct 2018, 3:19am

Jealous
A shortcut has to be a challenge, otherwise it would just be the way. No situation is so dire that panic cannot make it worse.
There are two kinds of people in this world: those can extrapolate from incomplete data.

Marc
Posts: 56
Joined: 18 Aug 2016, 6:03pm
Location: Hamburg, Germany
Contact:

Re: Pictures of your recumbent

Postby Marc » 22 Oct 2018, 4:51pm

[XAP]Bob wrote:Jealous

:D
I know the feeling.

PJM496
Posts: 10
Joined: 12 May 2018, 3:15pm

Re: Pictures of your recumbent

Postby PJM496 » 4 Dec 2018, 6:15pm

Hello all,

I have a Performer JC-26X. I’ve fitted it with a Windwrap GTX fairing & occasionally use the Burley Nomad trailer.

I’ve only had the trike for a few months, and have not gone to far on it yet, but I’m loving having a Recumbent trike!

Really looking forward to getting out a lot next year, developing my fitness and enjoying multi day trips, (long & short).

Love reading all your posts on here ladies & gents, keep them coming - hopefully add plenty of my own moving forward.

Safe riding all!

Paul
Image Attachments
1292D2EE-A383-417D-A6C2-3AC535297D08.jpeg

Marc
Posts: 56
Joined: 18 Aug 2016, 6:03pm
Location: Hamburg, Germany
Contact:

Re: Pictures of your recumbent

Postby Marc » 26 Dec 2018, 8:42pm

Nice trailer!

A couple of month ago, I've build a trailer with drum brakes for my trike:

Image

Image

https://etrike.wordpress.com/2018/10/07/diy-trailer

Gerald
Posts: 1
Joined: 27 Dec 2018, 7:36pm

Re: Pictures of your recumbent

Postby Gerald » 27 Dec 2018, 7:44pm

Vangelo wrote:Just joined forum....looking for other members in my area (Northants)

Been riding 3 years........started with a 2nd hand HP Speed Machine:
Image
Didnt really like the small front wheel or the over-engineered front suspension. Modified to this as soon as I worked up the courage:
Image
You may notice I had to jack up the suspension to retain front geometry, but this had the added bonus of eliminating the idler presenting the chain with a straight run. Bike was totally transformed after this modification.

I was intrigued by the stick bikes & when these appeared second hand I snapped them up:
Image
Image
The Team has gone home to Italy where I spend a few weeks in the year & get some great rides!

Finally, a Far Eastern Performer:
Image
.....my fave :D


Being that several years has passed by since you retrofitted the Speedmachine to be 26x26, was there any regrets in doing the retrofit and would you recommend a similar retrofit to a fellow bent rider?

Thank you,

Gerald