Ex display Roux Menthe 'black' frameset, Reynolds 525 tubing, equivalent to R531.
55cm c-t, this has quite a bit of seat tube beyond the top tube junction so is only 49cm c-c, makes this quite a good option for the shorter of inside leg whilst the front end enables a relaxed position to be possible.
top tube is 55cm actual with an effective (if measuring as if horizontal top tube) 58cm c-c.
Seatpost requirement is 27.2mm and a plain alloy post is included.
3 sets of bottle cage mounts
130mm rear dropouts.
With the included mudguards you can fit a circa 30mm tyre under the rear, tyre in the photo is a 28mm Panracer EVO A that measures an actual 30.5mm in width on the rim and a bit of space to spare, the front shown is actually a really tall Giant PR3 28mm - hence fairly close to guard but is how I would normally have my guards anyway.
I also tried a PSL2 28mm - actual width 28.5mm, I'll fit the Giant onto the same rim as the rear and check to see if an actual 30mm will fit under the front.
The plain 4 bolt stem is also included
There are a few scratches from were the frame was mounted on display, these are shown in the photo.
I'm after £300 plus postage, this should be around £19 via Parcelforce with included insurance, collection is always welcome, I'm 2mins from J9 A1.
The brake calipers are not included but are available for an extra £20, these are 57mm RX100.
Also the wheels are not included, these were to help with the photo and sizing of tyre under the guards.
Private Small Ads only. Dealers, traders or commercials will be deleted.
1 post • Page 1 of 1