Page 1 of 1

Sold

Posted: 15 Sep 2020, 4:09pm
by Jayneypie1
IMG_6483.jpg

Hand built wheels size 25mm to fit 11 speed or can be adapted to 9/10 speed they are Hope Pro4 hubs and Mavic wheel frames size on tyres 70c x25c 25-622. They can be converted to discs if required but I am not sure if you can use tubeless in them! They have not been used. Cost £400.00 when purchased. £200.00 o.n.o

Re: Hand built wheels

Posted: 15 Sep 2020, 9:13pm
by jahknob
Hi,
Could you provide a bit more information about these wheels? Some more details about the make and model of the rims, spokes and hubs would make it much easier to establish whether this is a good deal (or not). Even the number of spokes, which I can count myself (32/32), is a helpful piece of information when selling wheels, along with the intended use (road riding/racing/commuting/touring etc)
Thanks,
j.

Re: Hand built wheels

Posted: 16 Sep 2020, 9:20am
by greyingbeard
Rim size (read it off the tyre)
which rims
which hubs
how many spokes
which spokes
who built them ?
are they for disc brakes, rim brakes, or both ?
they may be great wheels but no-one has a clue except you.

Re: Hand built wheels

Posted: 17 Sep 2020, 10:39am
by leftpoole
greyingbeard wrote:Rim size (read it off the tyre)
which rims
which hubs
how many spokes
which spokes
who built them ?
are they for disc brakes, rim brakes, or both ?
they may be great wheels but no-one has a clue except you.


Well, Greying beard, it is pretty well obvious they are for discs!!

Re: Hand built wheels

Posted: 17 Sep 2020, 10:46am
by tuttonp
leftpoole wrote:
greyingbeard wrote:Rim size (read it off the tyre)
which rims
which hubs
how many spokes
which spokes
who built them ?
are they for disc brakes, rim brakes, or both ?
they may be great wheels but no-one has a clue except you.


Well, Greying beard, it is pretty well obvious they are for discs!!


or Both??

Re: Hand built wheels

Posted: 19 Sep 2020, 11:21am
by leftpoole
tuttonp wrote:
leftpoole wrote:
greyingbeard wrote:Rim size (read it off the tyre)
which rims
which hubs
how many spokes
which spokes
who built them ?
are they for disc brakes, rim brakes, or both ?
they may be great wheels but no-one has a clue except you.


Well, Greying beard, it is pretty well obvious they are for discs!!


or Both??


Indeed. They appear rim brake (rim) with Disc availability hub. Versatile......

Re: Hand built wheels

Posted: 19 Sep 2020, 6:03pm
by UpWrong
Tyres are 25mm but I doubt the rims are. I think the wrong advice was given above.

Re: Hand built wheels

Posted: 19 Sep 2020, 6:37pm
by leftpoole
UpWrong wrote:Tyres are 25mm but I doubt the rims are. I think the wrong advice was given above.


It wasn’t advice as such, it was an observation based on the photographs.

Re: Hand built wheels

Posted: 19 Sep 2020, 7:10pm
by UpWrong
leftpoole wrote:
UpWrong wrote:Tyres are 25mm but I doubt the rims are. I think the wrong advice was given above.


It wasn’t advice as such, it was an observation based on the photographs.


You can't read rim size off a tyre which is what greyingbeard seemed to be saying.

Re: Hand built wheels

Posted: 19 Sep 2020, 7:20pm
by PH
UpWrong wrote:You can't read rim size off a tyre which is what greyingbeard seemed to be saying.

Depends which dimension you're looking for.

Re: Hand built wheels

Posted: 19 Sep 2020, 8:24pm
by tuttonp
PH wrote:
UpWrong wrote:You can't read rim size off a tyre which is what greyingbeard seemed to be saying.

Depends which dimension you're looking for.


I suspect most people would like to know rim width to understand what width tyres these wheels would accept

Re: Hand built wheels

Posted: 19 Sep 2020, 8:54pm
by PH
tuttonp wrote:
PH wrote:
UpWrong wrote:You can't read rim size off a tyre which is what greyingbeard seemed to be saying.

Depends which dimension you're looking for.


I suspect most people would like to know rim width to understand what width tyres these wheels would accept

We're doing a great job of keeping these wheels at the top of the for sale board for the OP :wink:
Is there some error in what I wrote?

Re: Hand built wheels

Posted: 22 Sep 2020, 11:36am
by mumbojumbo
Any more details.