Hase Pino Children's Crankset wanted

Private Small Ads only. Dealers, traders or commercials will be deleted.
lucifer
Posts: 4
Joined: 2 Dec 2019, 3:41pm

Hase Pino Children's Crankset wanted

Postby lucifer » 2 Dec 2019, 3:58pm

Hi all

Looking for a used Hase Pino children's crankset. eBay has yielded nothing.
Hoping this ad finds someone who've got one they no longer need! Looking to get my kid pedalling asap :)

cheers

Bowedw
Posts: 286
Joined: 22 Feb 2011, 10:26pm

Re: Hase Pino Children's Crankset wanted

Postby Bowedw » 3 Dec 2019, 10:27am

Hi not sure what you are looking for but I have a Spa triple professionally shortened to 150 (I would need to check as may be 155) Square taper. Could be used as a single on middle ring with plain guard on the outside. PM me if of any interest.

lucifer
Posts: 4
Joined: 2 Dec 2019, 3:41pm

Re: Hase Pino Children's Crankset wanted

Postby lucifer » 3 Dec 2019, 12:25pm

I'm in fact looking for a very specific accessory. It's a children's cranks + BB assembly that clamps on to the front boom of the Pino to allow children who can't yet reach the end-boom cranks to be able to pedal..
"Children's Crankset" term I agree is not very explanatory, but that's Hase's terminology..

Here's a picture of what I'm looking for:
childrenscraksbb.JPG
Hase Pino Children's crankset/bottom bracket


And here it is in action:
pino-kiddiecranksinaction.JPG
Children's Crankset in action


cheers

Vorpal
Moderator
Posts: 17384
Joined: 19 Jan 2009, 3:34pm
Location: Not there ;)

Re: Hase Pino Children's Crankset wanted

Postby Vorpal » 3 Dec 2019, 1:20pm

can you use the kiddy crank mounting from SJS? https://www.sjscycles.co.uk/componentst ... -mm-black/

Otherwise, try searching on kiddy cranks. Maybe there is something adaptable for sale on ebay or one of the other forums? Try the Tandem club forum?
“In some ways, it is easier to be a dissident, for then one is without responsibility.”
― Nelson Mandela, Long Walk to Freedom

lucifer
Posts: 4
Joined: 2 Dec 2019, 3:41pm

Re: Hase Pino Children's Crankset wanted

Postby lucifer » 3 Dec 2019, 2:36pm

Hi Vorpal, thanks for the pointers. However, as the boom is 50mm it's unlikely that kiddy cranks for trad tandems would fit though.
I will try Tandem Club forum as well.

There's always the friendly neighbourhood metalworker if all else fails!

cheers

Vorpal
Moderator
Posts: 17384
Joined: 19 Jan 2009, 3:34pm
Location: Not there ;)

Re: Hase Pino Children's Crankset wanted

Postby Vorpal » 3 Dec 2019, 4:11pm

lucifer wrote:Hi Vorpal, thanks for the pointers. However, as the boom is 50mm it's unlikely that kiddy cranks for trad tandems would fit though.
I will try Tandem Club forum as well.

There's always the friendly neighbourhood metalworker if all else fails!

cheers

Do Hase no longer off them? I would think they'd be the best place to get one?
Maybe the Circe one would work? That's designed to fit a front boom.
“In some ways, it is easier to be a dissident, for then one is without responsibility.”
― Nelson Mandela, Long Walk to Freedom

lucifer
Posts: 4
Joined: 2 Dec 2019, 3:41pm

Re: Hase Pino Children's Crankset wanted

Postby lucifer » 3 Dec 2019, 5:21pm

Do Hase no longer off them?

They do, but at a prohibitive cost! Hence looking for a used one..

Maybe the Circe one would work?

I contacted Circe re this in fact, they said it wouldn't fit, but didn't offer any further explanation.. for one I see the drive side is swapped.. I suspect with a bit of persuasion it could be made to work.. but I haven't come across any tech specs to say for sure.

cheers