Private Small Ads only. Dealers, traders or commercials will be deleted.
5 posts • Page 1 of 1
If you have a frame pump which is short you can extend it by slipping a sleeve over the handle shaft. i use a cork drilled through lengthways first then slit lengthways. Pipe lagging works as well.
At the last count:- Focus Variado, Peugeot 531 pro, Dawes Discovery Tandem, Dawes Kingpin, Raleigh 20, Falcon K2 MTB dropped bar tourer, Longstaff trike conversion on a Falcon corsa.