Campagnolo cones

Private Small Ads only. Dealers, traders or commercials will be deleted.
disherwood
Posts: 25
Joined: 19 Jan 2008, 9:26pm

Campagnolo cones

Postby disherwood » 11 Feb 2017, 11:02pm

I have 2 new Campagnolo cones sized as below that i have no use for but need cones to replace those in my old TIPO hubs. Happy to swap / do a deal if you have any that will do the job.
New cones are 9 x 26 measuring 15.9mm diameter and 9.5mm long

Required cones :-
Front 9.5 x 26 measuring 15.9mm diameter and 11.6mm long
AND / OR
Rear 10 x 26 measuring 16.9mm diameter and 11.6mm long

disherwood
Posts: 25
Joined: 19 Jan 2008, 9:26pm

Re: Campagnolo cones

Postby disherwood » 11 Feb 2017, 11:27pm

........not concentrating !

the 9.5 x 26 should read 9 x 26

cheers

Cheesedisease
Posts: 47
Joined: 29 May 2010, 11:54am

Re: Campagnolo cones

Postby Cheesedisease » 14 Feb 2017, 1:07pm

A few years ago I got replacement cones from Abel Baker Cycles in Bishop's Stortford (tel. 01279 758718). They were for the earlier Campagnolo Gran Sport hubs with steel barrel and alloy flanges, but if I remember correctly they are the same as for the later GS / Tipo hubs. He was manufacturing his own replacement cones as well as other parts for the likes of Airlite hubs etc. He can be a little hard to get hold of though, and it took a few phonecalls for him to remember my address and send them out! But was very friendly and exceptionally helpful. Worth a go if nothing else comes up. Hope that's of some help.

disherwood
Posts: 25
Joined: 19 Jan 2008, 9:26pm

Re: Campagnolo cones

Postby disherwood » 14 Feb 2017, 1:17pm

Cheers

I'll give him a call

Thanks for your help
David

rjb
Posts: 2063
Joined: 11 Jan 2007, 10:25am
Location: Somerset (originally 60/70's Plymouth)

Re: Campagnolo cones

Postby rjb » 14 Feb 2017, 4:34pm

These any use to you?
They are all Campag 9.5 x 26
The 2 loose ones look unused. The others look in good condition on a Campag axle.
All to go as one lot if you are interested. Also have a pair of Nuovo Tipo hubs 32f 40r which feel silky smooth. In Somerset if that helps.

The pic doesn't do it justice.
image.jpg
Campag front axle and cones.

disherwood
Posts: 25
Joined: 19 Jan 2008, 9:26pm

Re: Campagnolo cones

Postby disherwood » 14 Feb 2017, 6:21pm

Hi
Thanks for your reply,
Unfortunately i may have confused you. I don't need 9.5 but 9

What price do you want for your bits ?

I am looking for a set of rims one 32 one 40, 27 1 1/4 to match the tipo hubs i already have, do you have any ?

Many thanks

David

drossall
Posts: 3589
Joined: 5 Jan 2007, 10:01pm
Location: North Hertfordshire

Re: Campagnolo cones

Postby drossall » 16 Feb 2017, 12:09am

Agree Abel Baker was good. I've not been there for years though.


Return to “Swaps, trades, etc.”

Who is online

Users browsing this forum: No registered users and 2 guests