Dolan e'tape
-
- Posts: 91
- Joined: 12 Mar 2017, 9:11pm
Dolan e'tape
Anyone any experience on a Dolan e'tape? Considering getting one with 105 through cycle to work scheme
-
- Posts: 1730
- Joined: 8 Dec 2012, 6:08pm
Re: Dolan e'tape
New 105 groupset being released soon in June!!
-
- Posts: 91
- Joined: 12 Mar 2017, 9:11pm
Re: Dolan e'tape
philvantwo wrote:New 105 groupset being released soon in June!!
More interested in the frame as I'm going to swap my ultegra groupset of my cannondale over
-
- Posts: 1730
- Joined: 8 Dec 2012, 6:08pm
Re: Dolan e'tape
Well best of luck with the press fit bottom bracket then!
-
- Posts: 91
- Joined: 12 Mar 2017, 9:11pm
Re: Dolan e'tape
philvantwo wrote:Well best of luck with the press fit bottom bracket then!
New ultegra crank and keep the fsa on the cannondale? Does that not eradicate that issue or is there more to it? I've still to speak to my mechanic about this
Re: Dolan e'tape
philvantwo wrote:Well best of luck with the press fit bottom bracket then!
https://www.dolan-bikes.com/road/road-f ... -2018.html
It says in "additional information" - bottom bracket thread = British.
You'll never know if you don't try it.
-
- Posts: 1730
- Joined: 8 Dec 2012, 6:08pm
Re: Dolan e'tape
The e'tape 105 complete bike is fitted with a bb30 press fit bottom bracket.
Re: Dolan e'tape
philvantwo wrote:The e'tape 105 complete bike is fitted with a bb30 press fit bottom bracket.
Sorry- Yes you are correct.
depending which L-Etape you look at, one is BS threaded and the 105 is BB30.
Last edited by cycleruk on 27 May 2018, 1:23pm, edited 2 times in total.
You'll never know if you don't try it.
Re: Dolan e'tape
cycleruk wrote:philvantwo wrote:The e'tape 105 complete bike is fitted with a bb30 press fit bottom bracket.
Sorry- Yes you are correct.
If anyone should have to fit a press fit BB go on eBay as there's a well engineered tool to do it at a reasonable cost.
-
- Posts: 91
- Joined: 12 Mar 2017, 9:11pm
Re: Dolan e'tape
And the cannondale is a bb30?? Also Can you point me to the bb30 tool? I'm very new to working on my bikes and my cannondale has the dreaded squeak
-
- Posts: 1730
- Joined: 8 Dec 2012, 6:08pm
Re: Dolan e'tape
On some models Specialized have ditched press fit and gone back to threaded bottom brackets.