Greystoke.
From your OP I'd formed the opinion that the Shimano nuts that came with your Shimano dyno-hub didn't fit properly. Now I'm not sure as you seem to be trying to get hold of some Shimano nuts.
If you'd like I can have a dig around for the domed nuts that came with my DH-3N31 and post them to you, they'll be somewhere in the garage or shed.
Shimano dynohub wheel nuts
Re: Shimano dynohub wheel nuts
SA use M9 x 1 threading as well. If those nuts didn't fit something is damaged or there has been a terrible mistake of some kind.
cheers
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: Shimano dynohub wheel nuts
The hub I bought didn't come with nuts.....hindsight is a wonderful thing.
It's possible the SA nuts we tried in the shop were in the wrong drawer.
The threads are not damaged and are m9 x1.0 (checked the pitch against an m6 last night).
Thank you Gaz, that's very kind of you.
If I can't source some today I shall pm you
Thanks everyone
It's possible the SA nuts we tried in the shop were in the wrong drawer.
The threads are not damaged and are m9 x1.0 (checked the pitch against an m6 last night).
Thank you Gaz, that's very kind of you.
If I can't source some today I shall pm you
Thanks everyone
Re: Shimano dynohub wheel nuts
Ordered a pair of BR-IM40 m9 nuts off a shimano front brake hub....allegedly they're the same.
Fingers crossed
Fingers crossed
Re: Shimano dynohub wheel nuts
Update.
Those nuts arrived and fit perfectly.
Thanks everyone I'm sorted now....job for this evening fitting it all
Cheers
Those nuts arrived and fit perfectly.
Thanks everyone I'm sorted now....job for this evening fitting it all
Cheers
Re: Shimano dynohub wheel nuts
slight mystery why the M9 nuts in the LBS didn't fit....
cheers
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: Shimano dynohub wheel nuts
I suspect that the nuts in the LBS were either in the wrong drawer or wrongly bagged and marked.
Lights worked well on my morning commute all ready for darker mornings and nights now
Lights worked well on my morning commute all ready for darker mornings and nights now