Old campag nuovo record derailleur clashing with largest sprocket
-
- Posts: 20
- Joined: 4 Jan 2018, 9:44pm
Old campag nuovo record derailleur clashing with largest sprocket
I have an old campag nuovo record derailleur. It doesn’t have the b screw that you would use to adjust the height of the jockey wheel. Hence the jockey wheel runs into the rear sprocket. Does anyone know how I can overcome this problem?
Re: Campag derailleur
What is the size of the largest sprocket?
The older I get the more I’m inclined to act my shoe size, not my age.
Re: Campag derailleur
when mounted on a campag dropout the largest sprocket is nominally 26T for a NR rear mech. This capacity can be reduced considerably when the RD is mounted on another style of dropout.
If the RD cage is not sufficiently vertical then adding a tab washer between the mech and the dropout can alter the mech position. IIRC the kind of tab washer that holds front hubs into some front forks can be modified to do this job.
cheers
If the RD cage is not sufficiently vertical then adding a tab washer between the mech and the dropout can alter the mech position. IIRC the kind of tab washer that holds front hubs into some front forks can be modified to do this job.
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
-
- Posts: 20
- Joined: 4 Jan 2018, 9:44pm
Re: Campag derailleur
Thanks for the replies. Have been away so a bit slow in replying myself. Will try the tab washer option Brucey. Thanks
Iain
Iain