Hi all ,
i getting my forks resprays, but before i do , i'm unsure whether to get braze on's fitted or just get the tubus mounting kit, if i do go with braze on's should i get the rack 1st for measurement or is there a standard measurement from the axel eyelet's
Cheers
braze on's or mounting bolts
Re: braze on's or mounting bolts
there is a standard separation for the mid-fork bosses vs the dropout eyelets but they don't all work in exactly the same way; best to check that your carrier uses the standard dimension
tubus duo
tubus tara
The carrier is nearly always much better mounted using a braze-on mount but
-surface mounted eyes sometimes fatigue off the forks (I'd always use a loop at the front with these types of braze-on) and
- through-blade mountings are better, but not all forks will accept them without the fork itself being weakened
cheers
tubus duo
tubus tara
The carrier is nearly always much better mounted using a braze-on mount but
-surface mounted eyes sometimes fatigue off the forks (I'd always use a loop at the front with these types of braze-on) and
- through-blade mountings are better, but not all forks will accept them without the fork itself being weakened
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~