'zero reach' stem for 1.1/8 steerer

For discussions about bikes and equipment.
User avatar
531colin
Posts: 16083
Joined: 4 Dec 2009, 6:56pm
Location: North Yorkshire

Re: 'zero reach' stem for 1.1/8 steerer

Post by 531colin »

Mick F wrote:Correct me if I'm wrong.

If a dropped 'bar bike had zero reach, would it handle correctly?
With the stem pointing forwards it gives stability as your hands would be forward of the steerer.

Could you in theory put the stem on backwards and there would be zero effect?
Somehow I think not.

Or am I wrong?
Willing to be educated here!

Where are the rider's hands?
If the rider has her hands on the tops because the reach is too long, and you shorten the reach so she is then comfortable with her hands on the hoods, if her hands are the same distance forward of the headset, then the steering is unaffected.
(If you ride no hands, the steering is the same whatever handlebars you have)
User avatar
531colin
Posts: 16083
Joined: 4 Dec 2009, 6:56pm
Location: North Yorkshire

Re: 'zero reach' stem for 1.1/8 steerer

Post by 531colin »

zenitb wrote:Mick - most Fiets bikes have hands a long way back from the centreline of the steerer. No reports of mass casualties yet :-) :-) :-)

And a much slacker head angle, and longer trail
User avatar
gaz
Posts: 14649
Joined: 9 Mar 2007, 12:09pm
Location: Kent

Re: 'zero reach' stem for 1.1/8 steerer

Post by gaz »

Mick F wrote:Could you in theory put the stem on backwards and there would be zero effect?
Somehow I think not.

CJ's covered that before, here.
High on a cocktail of flossy teacakes and marmalade
ratherbeintobago
Posts: 974
Joined: 5 Dec 2010, 6:31pm

Re: 'zero reach' stem for 1.1/8 steerer

Post by ratherbeintobago »

Mondraker used to make a very short stem (something like 10mm) but this was at the expense of increasing stack height as the bars effectively sit on top of the steerer.
Blackredgold1964
Posts: 100
Joined: 21 Dec 2007, 11:03pm

Re: 'zero reach' stem for 1.1/8 steerer

Post by Blackredgold1964 »

PT1029 wrote:NB See sales section :-
viewtopic.php?f=32&t=128888
A short stem available, 1 1/8 X 31.8 bar diameter.

Thanks, PT1029, just ordered a stem with that spec before seeing your post.
Blackredgold1964
Posts: 100
Joined: 21 Dec 2007, 11:03pm

Re: 'zero reach' stem for 1.1/8 steerer

Post by Blackredgold1964 »

zenitb wrote:
Blackredgold1964 wrote:Hi BRG..to clarify the Acor Double Bracket attaches to the existing stem not the steerer so is not dependent on steerer width. ..

understood, zenitb, Thanks.
Blackredgold1964
Posts: 100
Joined: 21 Dec 2007, 11:03pm

Re: 'zero reach' stem for 1.1/8 steerer

Post by Blackredgold1964 »

531colin wrote:
horizon wrote:women's specific design,...

thanks for the explanations, 531 colin and horizon. I've not read through all the links but would like to contribute that I believe that 559 wheels are much better for smaller people. My wife of 5.2" even has a beautiful Roberts built audax bike around 15 years old but swears she needs a lighter bike for her upcoming half triathlon (after all, all of her friends have ridiculously lightweight carbon bikes). That's how she got the Specialised for Xmas. It is indeed quite a bit lighter but then I have to fiddle around with comfort again ... However, she is quite fast on it I have to admit
User avatar
Mick F
Spambuster
Posts: 56359
Joined: 7 Jan 2007, 11:24am
Location: Tamar Valley, Cornwall

Re: 'zero reach' stem for 1.1/8 steerer

Post by Mick F »

Excellent info! :D

I was wrong. Fine, I asked to be corrected if I was.
Mick F. Cornwall
User avatar
531colin
Posts: 16083
Joined: 4 Dec 2009, 6:56pm
Location: North Yorkshire

Re: 'zero reach' stem for 1.1/8 steerer

Post by 531colin »

Blackredgold1964 wrote:... I believe that 559 wheels are much better for smaller people. My wife of 5.2" even has a beautiful Roberts..


Not "much" better. Maybe a bit better, depending on the rest of the design.
For example, if you stick with the 72 degree head angle common in 700c Audax type bikes, because the wheel is smaller you need less fork offset for the same trail....less fork offset = either longer reach or shorter front centre. https://en.wikipedia.org/wiki/Bicycle_and_motorcycle_geometry
Post Reply