Brucey wrote:in PD-M324 the cage is ~66mm x 100mm, i.e. it sticks out from the shoulder/crank by 100mm. The clipless mechanism is centred ~53mm out.
The wellgo wpd981 sticks out 110mm from crank arm.
With cage 98 x 64 mm.
9-10 shoe is 4" wide.
So I couldn't use a narrower pedal cage.
I use clips not clipless, wider cages don't appear to exist unless you go for shaped bmx design then difficult to add toe clips?
Bearings on the wellgo aren't up to shimano quality.
But can be had for less than £20 if you can find them.