Interupter brake levers
Interupter brake levers
You know the ones I mean? They are on the tops of your drop bars, either side of the stem, and allow you to pull the brakes on while riding on the 'flats'. I think some people call them cross-top levers or XC levers?
My question is: do they reduce the effectiveness of the brakes when you are operating the brakes from the conventional drop levers?
My bike, which I've had around two years, came fitted with them. In all of that time I've only ever used them twice - and one of those was just to test them. Considering removing them....bit of a chore 'cos I'll need new outer cables..thus if there is even a small but noticeable improvement in braking then I'm be more enthused to do the job.
thank you for your thoughts
My question is: do they reduce the effectiveness of the brakes when you are operating the brakes from the conventional drop levers?
My bike, which I've had around two years, came fitted with them. In all of that time I've only ever used them twice - and one of those was just to test them. Considering removing them....bit of a chore 'cos I'll need new outer cables..thus if there is even a small but noticeable improvement in braking then I'm be more enthused to do the job.
thank you for your thoughts
Re: Interupter brake levers
They came with a Tiagra spec bike I bought a number of years ago. Like you I reckon I’ll of used them a handful of times. As they don’t get in the way and I can still fit a bar bag I’ve left them there.
I’ve no complaints at all with the current braking capability so I doubt removing them can make any noticeable increase in performance.
I’ve no complaints at all with the current braking capability so I doubt removing them can make any noticeable increase in performance.
Whatever I am, wherever I am, this is me. This is my life
https://stcleve.wordpress.com/category/lejog/
E2E info
https://stcleve.wordpress.com/category/lejog/
E2E info
Re: Interupter brake levers
I don't see how it would make any difference to braking performance. When they're not in use, they're basically an extra cable stop. I guess there might be a slight improvement if it enables gentler bends on your cable routing but I wouldn't expect much.
MJR, mostly pedalling 3-speed roadsters. KL+West Norfolk BUG incl social easy rides http://www.klwnbug.co.uk
All the above is CC-By-SA and no other implied copyright license to Cycle magazine.
All the above is CC-By-SA and no other implied copyright license to Cycle magazine.
Re: Interupter brake levers
For them to have zero effect on braking from the main lever there must be zero cable slack. Even a part of a mm has an effect although it may not be noticeable.
Re: Interupter brake levers
are you referring to hydraulic or cable levers?
Re: Interupter brake levers
mattsccm wrote:For them to have zero effect on braking from the main lever there must be zero cable slack. Even a part of a mm has an effect although it may not be noticeable.
Where would you think the cable slack would be introduced? As I understand it (it's been a while since I dissected mine), interrupter levers are not sprung and are held closed tight by the brake springs, as are the main levers.
MJR, mostly pedalling 3-speed roadsters. KL+West Norfolk BUG incl social easy rides http://www.klwnbug.co.uk
All the above is CC-By-SA and no other implied copyright license to Cycle magazine.
All the above is CC-By-SA and no other implied copyright license to Cycle magazine.
-
- Posts: 1525
- Joined: 1 Aug 2018, 8:18pm
Re: Interupter brake levers
To fit these you need longer cables so there must be more friction on inside of housing.Not yery good if you use a wicker basket.
Re: Interupter brake levers
mumbojumbo wrote:To fit these you need longer cables so there must be more friction on inside of housing.Not yery good if you use a wicker basket.
No you don’t. You just cut your existing outer cable where it emerges from under the handlebar tape and fit the levers there, no extra length required. I agree that if you use a basket or a handlebar bag, they can get in the way somewhat, though it is possible to angle them downwards so that you can use at bar bag.
I had them on my Ridgeback tourer and found them invaluable when riding on the tops.
Sherwood CC and Notts CTC.
A cart horse trapped in the body of a man.
http://www.jogler2009.blogspot.com
A cart horse trapped in the body of a man.
http://www.jogler2009.blogspot.com
Re: Interupter brake levers
thelawnet wrote:are you referring to hydraulic or cable levers?
They are on cable discs.
Re: Interupter brake levers
These came as standard on my Specialised bike, and I've found them excellent, and have retrofitted them to my other suitable machine. Both with rim brakes, and neither suffered any reduction in braking performance - in fact braking may be improved due to the duality of the available brake holding positions.
Leicester; Riding my Hetchins since 1971; Day rides on my Dawes; Going to the shops on a Decathlon Hoprider
Re: Interupter brake levers
My experience, and i've got them on several bikes and used them for @ 15 years, is that, set up properly, they offer better braking than the main levers regardless of brand/quality. I get the same result regardless of brake type, currently i have them running the stops for discs and d/p rim brake set ups. Can't recall which ones i'm currently using but i've used, Specialised, Tektro and Cane Creek - the CF ones never arrived
I do use them on bikes with barbags, with a standard R&K block the fit is a bit close for thick winter gloves, with an extender fitted you have bags of room.
As they work by compressing the outer you need to use decent quality linear/compressionless outer with nice 'smooth' inners otherwise the result is akin to using 'suicide' levers.
I do use them on bikes with barbags, with a standard R&K block the fit is a bit close for thick winter gloves, with an extender fitted you have bags of room.
As they work by compressing the outer you need to use decent quality linear/compressionless outer with nice 'smooth' inners otherwise the result is akin to using 'suicide' levers.
Convention? what's that then?
Airnimal Chameleon touring, Orbit Pro hack, Orbit Photon audax, Focus Mares AX tour, Peugeot Carbon sportive, Owen Blower vintage race - all running Tulio's finest!
Airnimal Chameleon touring, Orbit Pro hack, Orbit Photon audax, Focus Mares AX tour, Peugeot Carbon sportive, Owen Blower vintage race - all running Tulio's finest!
Re: Interupter brake levers
I've got them on the two drop bar bikes I've got. The first bike (Alfine 8 with microshift brakes) came with them fitted. The second bike, derailleurs with BB7 cable discs, I fitted them when I built it.
The braking on both bikes feels stronger from the interrupters than the brifters. But I think that's because the hand position is better. I didn't use any sort of compressionless housing.
As I wasn't used to drop bars, at first I really liked having the interrupters. These days I'm getting used to riding with drop bars, so I ride on the flat part of the bar less and less, and only when it feels safe. I find the narrow hand position doesn't feel entirely secure, so if I'm somewhere I might need to brake a bit sharpish, I'll be on the hoods or in the drops.
If/when I reconfigure my set-up (I've got DT shifters and Tektro 341s waiting), I probably won't bother with the interrupters.
The braking on both bikes feels stronger from the interrupters than the brifters. But I think that's because the hand position is better. I didn't use any sort of compressionless housing.
As I wasn't used to drop bars, at first I really liked having the interrupters. These days I'm getting used to riding with drop bars, so I ride on the flat part of the bar less and less, and only when it feels safe. I find the narrow hand position doesn't feel entirely secure, so if I'm somewhere I might need to brake a bit sharpish, I'll be on the hoods or in the drops.
If/when I reconfigure my set-up (I've got DT shifters and Tektro 341s waiting), I probably won't bother with the interrupters.
Last edited by mikeymo on 30 Sep 2020, 9:18pm, edited 1 time in total.
Re: Interupter brake levers
IMHO if you don't use them you should remove them; it is just another place for water to get in. IIRC there are housing joiners available which may allow you to get away with the same cables and bar tape. (you could fit inline adjusters if you can't get joiners).
If you do use such levers, be aware that the cable is flexed at this point and that this can (will, eventually) cause the cable to fail. I have seen this happen several times; normally the cable frays before it fails and you can see/feel the fraying before it is dangerous, but you never know.
cheers
If you do use such levers, be aware that the cable is flexed at this point and that this can (will, eventually) cause the cable to fail. I have seen this happen several times; normally the cable frays before it fails and you can see/feel the fraying before it is dangerous, but you never know.
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: Interupter brake levers
Brucey wrote:IMHO if you don't use them you should remove them; it is just another place for water to get in. IIRC there are housing joiners available which may allow you to get away with the same cables and bar tape. (you could fit inline adjusters if you can't get joiners).
Presumably then adding interrupter levers is easier than removing them, in terms of the brake cables?
Re: Interupter brake levers
Forgot about the water ingress.
Slack. You just find it hard to remove every last bit .
Awful things for decent baking. The leverage seems all wrong. Those on my Specialised were anyway.
Not sure why needed anyway. Riding with hands by the stem is pretty unstable anywhere brakes are needed.
Other may not be so fussy I guess. Good luck.
Slack. You just find it hard to remove every last bit .
Awful things for decent baking. The leverage seems all wrong. Those on my Specialised were anyway.
Not sure why needed anyway. Riding with hands by the stem is pretty unstable anywhere brakes are needed.
Other may not be so fussy I guess. Good luck.