When did Centre-pull brakes take over from Side-pull ?

For discussions about bikes and equipment.
User avatar
Mick F
Spambuster
Posts: 56359
Joined: 7 Jan 2007, 11:24am
Location: Tamar Valley, Cornwall

Re: When did Centre-pull brakes take over from Side-pull ?

Post by Mick F »

Brucey wrote:
Mick F wrote:Nowt to do with the spring.


Everything to do with the spring.... :roll:
It's NOTHING to do with the spring.

Take the spring off and the brake will still be centred and operate, though floppily of course and rub a bit.
The spring is a release spring and gives "feel" to the brake lever.
Mick F. Cornwall
pwa
Posts: 17371
Joined: 2 Oct 2011, 8:55pm

Re: When did Centre-pull brakes take over from Side-pull ?

Post by pwa »

Mick F wrote:
Brucey wrote:
Mick F wrote:Nowt to do with the spring.


Everything to do with the spring.... :roll:
It's NOTHING to do with the spring.

Take the spring off and the brake will still be centred and operate, though floppily of course and rub a bit.
The spring is a release spring and gives "feel" to the brake lever.

The spring is what keeps the blocks off the rims when you are not pressing the lever, isn't it? I would expect that a calliper without its spring would still slow / stop the bike when you needed it, but the rest of the time the blocks would scrape the rims and the whole assembly would rattle.
Last edited by pwa on 13 Oct 2020, 9:11am, edited 1 time in total.
peetee
Posts: 4292
Joined: 4 May 2010, 10:20pm
Location: Upon a lumpy, scarred granite massif.

Re: When did Centre-pull brakes take over from Side-pull ?

Post by peetee »

FWIW, Mick, Brucey, I think you are both right. Just not completely right.

And now for something calming and pleasant.
5CFBD2A0-C0D6-4DFF-8F80-95FA5EAE459B.jpeg
The older I get the more I’m inclined to act my shoe size, not my age.
User avatar
Mick F
Spambuster
Posts: 56359
Joined: 7 Jan 2007, 11:24am
Location: Tamar Valley, Cornwall

Re: When did Centre-pull brakes take over from Side-pull ?

Post by Mick F »

pwa wrote:The spring is what keeps the blocks off the rims when you are not pressing the lever, isn't it?
That's exactly what it's for.
Return spring.

Just done an experiment with Mercian.
Rear brake is single pivot.

Bike on the stand.
Unlatched the spring on both sides so it was free do as it pleased ............. and the brake works just as well as before and remains properly centred. It doesn't release very well of course, but the wheel spun fine.

Because the brake levers are Ergos, the brake lever returns ok by dint of the gear shift paddle being sprung-loaded forwards.

I say again.........
Single pivot brakes are centred by the centre bolt. If the brake is uneven and won't pull the same on both sides, it'll be the cable restricting it. Trial and error will sort it.

Doing it without the spring is a good experiment. I must try that again sometime when and if I need to set up a single pivot brake again.
Mick F. Cornwall
User avatar
NATURAL ANKLING
Posts: 13780
Joined: 24 Oct 2012, 10:43pm
Location: English Riviera

Re: When did Centre-pull brakes take over from Side-pull ?

Post by NATURAL ANKLING »

Hi,
Mick F wrote:
Brucey wrote:
Mick F wrote:Nowt to do with the spring.


Everything to do with the spring.... :roll:
It's NOTHING to do with the spring.

Take the spring off and the brake will still be centred and operate, though floppily of course and rub a bit.
The spring is a release spring and gives "feel" to the brake lever.

It's common sense to have a spring on brakes and you would call it a return spring so the brakes don't rub on the inside of your drums on your car
NA Thinks Just End 2 End Return + Bivvy - Some day Soon I hope
You'll Still Find Me At The Top Of A Hill
Please forgive the poor Grammar I blame it on my mobile and phat thinkers.
User avatar
Mick F
Spambuster
Posts: 56359
Joined: 7 Jan 2007, 11:24am
Location: Tamar Valley, Cornwall

Re: When did Centre-pull brakes take over from Side-pull ?

Post by Mick F »

.......... except disc brakes.
They rub (gently) all the time as there's no return spring.
Mick F. Cornwall
User avatar
NATURAL ANKLING
Posts: 13780
Joined: 24 Oct 2012, 10:43pm
Location: English Riviera

Re: When did Centre-pull brakes take over from Side-pull ?

Post by NATURAL ANKLING »

Hi,
Mick F wrote:.......... except disc brakes.
They rub (gently) all the time as there's no return spring.

Piston seals.........They are designed to return the piston just clear of the disc to prevent rubbing.
NA Thinks Just End 2 End Return + Bivvy - Some day Soon I hope
You'll Still Find Me At The Top Of A Hill
Please forgive the poor Grammar I blame it on my mobile and phat thinkers.
9494arnold
Posts: 1208
Joined: 21 Jan 2007, 3:13pm

Re: When did Centre-pull brakes take over from Side-pull ?

Post by 9494arnold »

I can confirm 2 centring tools for 500 and 605, I have one of each.

Spindles aren't Alloy on my 405/605's , I know because I have had them to bits to extend the threaded bit at the back for use on the trike.

Can't comment on Carrera , never messed with one but allot through bold does seem unlikely to me.
peetee
Posts: 4292
Joined: 4 May 2010, 10:20pm
Location: Upon a lumpy, scarred granite massif.

Re: When did Centre-pull brakes take over from Side-pull ?

Post by peetee »

Sorry, wasn’t referring to the pivot being alloy, just the arms. Hence reference to the spongy feel.
The older I get the more I’m inclined to act my shoe size, not my age.
drossall
Posts: 6115
Joined: 5 Jan 2007, 10:01pm
Location: North Hertfordshire

Re: When did Centre-pull brakes take over from Side-pull ?

Post by drossall »

I spent happy hours as a teenager, bending the springs on Weinmann 500s and 730s, to get them to centre properly. I gradually got better at tightening different bits in the right sequence instead, but it was still tricky. I have one of those Weinmann tools in my box, from the last such brakes I ever had.

Braking is strange. I got some Universals, then fairly soon went on to some Mark II Dura Ace models on my road bike. They stayed till I got some of the last SP Athenas.

When I first got the Dura Ace calipers, I nearly went over the bars first time, because they were so effective. But I finally replaced them with Shimano DPs because they were the opposite. That was on a different bike, could have been MA I suppose (see another thread) because the shoes were a bit lower, but not much. Maybe that's what they call brake fade :D
rogerzilla
Posts: 2887
Joined: 9 Jun 2008, 8:06pm

Re: When did Centre-pull brakes take over from Side-pull ?

Post by rogerzilla »

NATURAL ANKLING wrote:Hi,
Mick F wrote:.......... except disc brakes.
They rub (gently) all the time as there's no return spring.

Piston seals.........They are designed to return the piston just clear of the disc to prevent rubbing.

Disc runout (there's always some, even if it's 0.05mm) does this too, or in place of a retracting seal.

The late Jobst Brandt worked on disc brakes for Porsche and it was a major breakthrough when they realised it added virtually no drag if the pads touched the disc without any force. Prior to this, all sorts of fancy retraction mechanisms were tried. However, even a tiny amount of drag is unacceptable on a bicycle, with a fraction of the power to waste.
Brucey
Posts: 44521
Joined: 4 Jan 2012, 6:25pm

Re: When did Centre-pull brakes take over from Side-pull ?

Post by Brucey »

Mick F wrote:
Brucey wrote:
Mick F wrote:Nowt to do with the spring.


Everything to do with the spring.... :roll:
It's NOTHING to do with the spring.

Take the spring off and the brake will still be centred and operate, though floppily of course and rub a bit.
The spring is a release spring and gives "feel" to the brake lever.


Nonsense.

Moving the centrebolt only affects the brake centring because it moves the spring.

By your logic you would park a car with a bomb in it and when the bomb blew up, you would blame it on the car, not the bomb.... :roll:

Try unhooking one side of the spring and see how you get on....

[BTW in case it isn't b-obvious to you (like it should be) once the spring is unhooked from both sides of a SP brake, you can twirl the centrebolt into any position you like.]
Last edited by Brucey on 13 Oct 2020, 5:18pm, edited 1 time in total.
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
User avatar
NATURAL ANKLING
Posts: 13780
Joined: 24 Oct 2012, 10:43pm
Location: English Riviera

Re: When did Centre-pull brakes take over from Side-pull ?

Post by NATURAL ANKLING »

Hi,
peetee wrote:FWIW, Mick, Brucey, I think you are both right. Just not completely right.

And now for something calming and pleasant.
5CFBD2A0-C0D6-4DFF-8F80-95FA5EAE459B.jpeg

Where's the cows :mrgreen:
NA Thinks Just End 2 End Return + Bivvy - Some day Soon I hope
You'll Still Find Me At The Top Of A Hill
Please forgive the poor Grammar I blame it on my mobile and phat thinkers.
User avatar
Mick F
Spambuster
Posts: 56359
Joined: 7 Jan 2007, 11:24am
Location: Tamar Valley, Cornwall

Re: When did Centre-pull brakes take over from Side-pull ?

Post by Mick F »

Brucey wrote:
Mick F wrote:
Brucey wrote:

Everything to do with the spring.... :roll:
It's NOTHING to do with the spring.

Take the spring off and the brake will still be centred and operate, though floppily of course and rub a bit.
The spring is a release spring and gives "feel" to the brake lever.


Nonsense.

Moving the centrebolt only affects the brake centring because it moves the spring.

Try unhooking one side of the spring and see how you get on....

[BTW in case it isn't b-obvious to you (like it should be) once the spring is unhooked from both sides of a SP brake, you can twirl the centrebolt into any position you like.]
So, you're agreeing with me as well as disagreeing! :D

The centring of the brake is by dint of how its mounted.
The spring has to be the same on both sides to stop it being off-centre ............. of course!
Remove the spring, and the brake is still centred.

Try it.
I have, and what I say it true.
Mick F. Cornwall
User avatar
NATURAL ANKLING
Posts: 13780
Joined: 24 Oct 2012, 10:43pm
Location: English Riviera

Re: When did Centre-pull brakes take over from Side-pull ?

Post by NATURAL ANKLING »

Hi,
So there :lol:
NA Thinks Just End 2 End Return + Bivvy - Some day Soon I hope
You'll Still Find Me At The Top Of A Hill
Please forgive the poor Grammar I blame it on my mobile and phat thinkers.
Post Reply