B&M Luxos IQ 2, coaxial connector for USB?

For discussions about bikes and equipment.
Post Reply
GideonReade
Posts: 410
Joined: 4 Jul 2010, 10:46pm

B&M Luxos IQ 2, coaxial connector for USB?

Post by GideonReade »

Hi, we have a couple of these dynamo lamp/charging systems, with the round, screw-cover-waterproof coaxial connector. Sometimes the B&M leads (photo) just aren't exactly what we want. I did cut'n'splice one fairly effectively, but I'd rather make/buy a single piece lead that's the right length and right other end connector.

I do know B&M sell a fairly good set-of-extra leads at a fair price, but it mostly would be no use & thus a waste.

B&M won't tell me the type/spec/supply of the connector.

Does anyone here know what it is and where available, either bare or maybe 1m cable fitted with bare other end?

I measured the hood screw thread as 10.9mm and the outer conductive barrel as 3.5mm, but I can't get a handle on the inner pin diameter.

Cheers
Attachments
B&M lead to connect coax to USB.
B&M lead to connect coax to USB.
Post Reply