Nitto drop bar 26.0mm quill stem compatibility

For discussions about bikes and equipment.
Post Reply
Daipink
Posts: 32
Joined: 26 Jun 2011, 12:01pm

Nitto drop bar 26.0mm quill stem compatibility

Post by Daipink »

Can anyone recommend 26.0mm Nitto bars that work well with their Dynamic quill stem? I'm looking for something close to a compact bar pattern in 44cm bar width that I can easily fit the Dynamic quill stem too. For the record this stem doesn't fit round modern pattern Highway One bars and the like. It does fit easily round the bends on some Nitto M172 bars I have for another project but these are 31.8mm in the centre. Does anybody know of a similar pattern Nitto bar in 26.0mm diameter and 44cm bar width? I could go slightly longer reach and lower drop on the bars but not massively. Hoping someone out there can help. It's for a threaded forks by the way, got tired of ugly but effective adapter.
Jim
Posts: 20
Joined: 15 Jul 2020, 12:40pm
Location: Cardiff

Re: Nitto drop bar 26.0mm quill stem compatibility

Post by Jim »

Nitto M177 are 26mm and come in a variety of widths, including 440. See eg https://ninefit.uk/products/nitto-noodl ... gJEcfD_BwE , although I see that particular seller has sold out of the 440. I use the Nitto touring on my stem (identical to yours) and I find these very comfortable
nsew
Posts: 943
Joined: 14 Dec 2017, 12:38pm

Re: Nitto drop bar 26.0mm quill stem compatibility

Post by nsew »

Jim wrote: 26 Sep 2021, 12:31pm Nitto M177 are 26mm and come in a variety of widths, including 440. See eg https://ninefit.uk/products/nitto-noodl ... gJEcfD_BwE , although I see that particular seller has sold out of the 440. I use the Nitto touring on my stem (identical to yours) and I find these very comfortable
Why are you linking to an obviously dubious website with stupid prices? Someone in your family should take the internet off you.

https://www.hubjub.co.uk/nitto-mod177-noodle-134-p.asp
Jim
Posts: 20
Joined: 15 Jul 2020, 12:40pm
Location: Cardiff

Re: Nitto drop bar 26.0mm quill stem compatibility

Post by Jim »

Link when wrong intended to be Hubjub which is where I got mine. (as you'll see from the reference to 440 mm being sold out.) Fortunately my courtesy remained intact however
Post Reply