V-Brake levers for drops

For discussions about bikes and equipment.
bikepacker
Posts: 1973
Joined: 5 Jan 2007, 7:08pm
Location: Worcestershire
Contact:

V-Brake levers for drops

Postby bikepacker » 1 Mar 2009, 3:46pm

I am fitting a dropped bar tourer with v-brakes. On my own bike I use Dia Compe 287v levers which work okay. I see that Tektro do some RL520 levers which are advertised to do the same but at almost half the price. Do any of you have experience with these Tektro levers?
There is your way. There is my way. But there is no "the way".

User avatar
natmat
Posts: 237
Joined: 8 Jan 2007, 2:25pm
Location: Sherborne, Dorset

Re: V-Brake levers for drops

Postby natmat » 1 Mar 2009, 4:44pm

I can only comment on the Tektro, rather than compare the two. So here's my 2p...

In my opinion, the V-brake drop-levers required too much grip strength to operate for longer rides, or rather for long periods of downhill braking. Compared to cantilevers on drops, the V-brakes required much more effort to pull and were just too tiring to use with hands on the hoods. So I ditched them after a short period in favour of the original canti-brakes. Cantis maybe not quite as good at stopping, but stop they do and required very little effort.

So, I don't recommend the Tektro ones.

Nat.

rogerzilla
Posts: 1315
Joined: 9 Jun 2008, 8:06pm

Re: V-Brake levers for drops

Postby rogerzilla » 1 Mar 2009, 9:33pm

I can tell you from experience that the Dia-Compe 287V levers are hopeless. They're badly made (a crude hack of the normal 287) and they still don't pull enough cable for comfortable pad-rim clearance.

If you have dropped bars, get Tektro wide-profile cantilevers instead.

User avatar
Si
Moderator
Posts: 15008
Joined: 5 Jan 2007, 7:37pm

Re: V-Brake levers for drops

Postby Si » 2 Mar 2009, 8:52am

Did my first ride with the tektro lever mated to XTR V brake (and rubbish pads). (only swopped the front over due to V brake not fitting rear with current rack)

I'm very impressed. They've a lovely smooth action, the hoods are comfortable, the lever shape is great for braking from the hoods, and it was certainly more powerful than the canti (campag frogs legs type) that it replaced despite having rubbish old pads in it. In fact, on the whole ride, which had a few long twisty downhills and some traffic, I didn't feel the need to brake from the drops once.

The XTR V with the same pads were on my old MTB before, mated to a XTR flat bar lever. The braking power and control with the tecktro drop bar lever seems just as good as with the old flat bar set up.

I'm now looking to replace the cantis on other bikes as funds allow.

DougieB
Posts: 626
Joined: 23 Nov 2008, 6:59pm
Location: Barcelona

Re: V-Brake levers for drops

Postby DougieB » 2 Mar 2009, 10:47am

I use the Tekto RL520 levers, with Avid v-brakes. I find them really good, plenty of stopping power from above or on the drops. For longer down hill sections I'm usually on the drops anyway, so haven't experienced a problem with tired hands.

MartinC
Posts: 1837
Joined: 10 May 2007, 6:31pm
Location: Bredon

Re: V-Brake levers for drops

Postby MartinC » 2 Mar 2009, 1:54pm

I've tried both the DiaCompe and Tektro levers. I'll endorse what's been said about the DiaCompe V levers. They work but I seemed badly designed - the noodles at the brake levers seemed a wierd idea. Tektro (or the Cane Creek badged versions) are much better and to me work fine. My hands are reasonabley strong, I guess, so I've not noticed that they need excessive pressure.

jayd
Posts: 57
Joined: 31 Aug 2008, 8:25pm

Re: V-Brake levers for drops

Postby jayd » 2 Mar 2009, 5:39pm

I set up an MTB conversion with the Dia- Compe levers and basic Tektro V-brakes last summer and had no problems with it. The little noodles coming out of the hoods weren't too fiddly, and I dispensed with the superfluous looking adjustable noodles (used the tektro ones) for the other end and fitted the cabling as neatly as I could. The results were better than the previous canti set -up, but not having tested the bike over long distance (donated to a friend shortly after) I can't say how they'd behave on the long haul. All bits off Ebay.

User avatar
georgew
Posts: 1480
Joined: 27 Jan 2007, 4:23pm

Re: V-Brake levers for drops

Postby georgew » 2 Mar 2009, 8:34pm

I'm not sure of the purpose of the noodles on the hoods of the Tektro levers. However I've just used cut-down noodles on Shimano Sora levers to guide the gear cables out of the way of a decent-sized bar bag which wouldn't otherwise fit. Not my idea but an elegant solution in my opinion.

User avatar
Si
Moderator
Posts: 15008
Joined: 5 Jan 2007, 7:37pm

Re: V-Brake levers for drops

Postby Si » 8 Mar 2009, 12:08pm

This topic comes up quite oten so have moved the thread to Too Good to Lose.

User avatar
AndrewLee
Posts: 12
Joined: 15 Aug 2007, 10:31pm
Location: Holmfirth
Contact:

Re: V-Brake levers for drops

Postby AndrewLee » 19 Mar 2009, 7:39pm

I use V brakes with 105 sti levers and they work really well. I bought a couple of gadgets called travel agents from Bob Jacksons when I had the bike refurbed once. They are two concentric pulleys which double the distance of cable pulled - great breaking control and effort. I fitted in-line adjusters as well. The travel agents or similar would make any lever work with V brakes.

Cheers
Life's too short not to be on your bike.

User avatar
Si
Moderator
Posts: 15008
Joined: 5 Jan 2007, 7:37pm

Re: V-Brake levers for drops

Postby Si » 20 Mar 2009, 9:40am

Travel Agents get very mixed reviews.

I had them coupled to Sora STI levers. They were extremely snatchy and just plain nasty to use in the wet. I soon got shot of them. I would imagine that on a heavier rig (eg tandem) the snatchiness would go.