I have a Carrera Subway with a Suntour XCT 8 speed triple crankset. I would like to do some full loaded touring on it and as such would like to swap the crankset for a 42/32/22. Would anyone know if this would be suitable...
http://www.chainreactioncycles.com/shim ... prod106885
Or could you recommend something else?
Many thanks
New Crankset for my Carrera Subway
Re: New Crankset for my Carrera Subway
IIRC the suntour chainsets fitted to subways often use an odd axle length, so you should normally budget for a new BB to match your new chainset.
Personally I would prefer a 'road' chainline (and reduced Q value) anyway, but if you start down this path you may wind up needing a new front mech.... and so it goes on.
cheers
Personally I would prefer a 'road' chainline (and reduced Q value) anyway, but if you start down this path you may wind up needing a new front mech.... and so it goes on.
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: New Crankset for my Carrera Subway
borderer wrote:I have a Carrera Subway with a Suntour XCT 8 speed triple crankset. I would like to do some full loaded touring on it and as such would like to swap the crankset for a 42/32/22. Would anyone know if this would be suitable...
http://www.chainreactioncycles.com/shim ... prod106885
Or could you recommend something else?
Many thanks
I've just ordered one of those myself
It recommends a 122mm BB axle length,if your front mech is a Shimano MTB one there's every chance it'll work with the correct BB length or perhaps some 2 to 4 either side of recommended IME.
-----------------------------------------------------------
"All we are not stares back at what we are"
W H Auden
"All we are not stares back at what we are"
W H Auden