B&M Quality.

For discussions about bikes and equipment.
g.meredith
Posts: 67
Joined: 2 Nov 2012, 3:51pm

B&M Quality.

Postby g.meredith » 17 Dec 2014, 9:59am

I have had two Busch Muller rear battery lights pack up on me within two months of purchase. Other brands I have owned have lasted for years. I am of the opinion that B&M are expensive and substandard in quality. Anyone else had issues.

WOOLIFERKINS
Posts: 134
Joined: 11 Apr 2008, 10:39pm
Location: Oxon

Re: B&M Quality.

Postby WOOLIFERKINS » 17 Dec 2014, 10:07am

Never. Which light?
Neil

g.meredith
Posts: 67
Joined: 2 Nov 2012, 3:51pm

Re: B&M Quality.

Postby g.meredith » 17 Dec 2014, 10:19am

Busch & Muller D Toplight XS Senso Rear Battery LED Light - 50 / 80 mm Vario Fitting
B + M Toplight Line senso battery back light

User avatar
fossala
Posts: 1192
Joined: 21 May 2013, 8:29am

Re: B&M Quality.

Postby fossala » 17 Dec 2014, 10:25am

I had a toplight brake plus die after 2 months or so. Got a replacement. I also had a luxos B, paintwork bubbled within 6 months.

User avatar
honesty
Posts: 2510
Joined: 16 Mar 2012, 3:33pm
Location: Somerset
Contact:

Re: B&M Quality.

Postby honesty » 17 Dec 2014, 10:30am

I had 2 rear toplight line plus lights fail within the first week of ownership. Both failed in exactly the same way, the capacitor for the stand light became detached and the lights would not work when stopped. First was returned and replaced with the 2nd, 2nd was returned and replaced with a light from a different manufacturer. Since then I've had no problems. I think in my case it's poor design rather than completely shoddy manufacturing. I've had no problems with my Luxos U.

WOOLIFERKINS
Posts: 134
Joined: 11 Apr 2008, 10:39pm
Location: Oxon

Re: B&M Quality.

Postby WOOLIFERKINS » 17 Dec 2014, 10:42am

g.meredith wrote:Busch & Muller D Toplight XS Senso Rear Battery LED Light - 50 / 80 mm Vario Fitting
B + M Toplight Line senso battery back light


Senso problems? I presume you've taken them back to the retailer for warranty work?
Neil

mercalia
Posts: 10553
Joined: 22 Sep 2013, 10:03pm
Location: london South

Re: B&M Quality.

Postby mercalia » 17 Dec 2014, 11:37am

I had a carrier based rearlight Toplight fail not due to electronics but rubbish mechanical switch and housing - after a few months of on and off the switch and housing around the switch cracked and disintegrated and broke up. One reason I got the equivalent dymano version which has been faultless. That was somne time ago maybe they dont use mechanical switchs now? BM lights are over priced some are good but some are badly cheaply made.

WOOLIFERKINS
Posts: 134
Joined: 11 Apr 2008, 10:39pm
Location: Oxon

Re: B&M Quality.

Postby WOOLIFERKINS » 17 Dec 2014, 11:39am

And the warranty?
Neil

mercalia
Posts: 10553
Joined: 22 Sep 2013, 10:03pm
Location: london South

Re: B&M Quality.

Postby mercalia » 17 Dec 2014, 1:06pm

WOOLIFERKINS wrote:And the warranty?


the shop swapped for the dyno one exactly the same to look at and build quality - hard plastic - but no switches to break

User avatar
meic
Posts: 19355
Joined: 1 Feb 2007, 9:37pm
Location: Caerfyrddin (Carmarthen)

Re: B&M Quality.

Postby meic » 17 Dec 2014, 1:34pm

Busch and Muller Ixon IQ.

Two failed, they replaced the first but got funny about the second. The postage fees to Germany put me off bothering in the end also nobody seems to understand that you can not just stop cycling for a month waiting for it to be repaired. The price then came down and it made sense just to buy more of them.. I can still use it if I plug in the dynamo as well as the batteries which fits in with the fault being in the voltage regulator which is a common fault with them.

However all of my battery lights fail, I must ride in the wrong sort of rain and ice.
Yma o Hyd

WOOLIFERKINS
Posts: 134
Joined: 11 Apr 2008, 10:39pm
Location: Oxon

Re: B&M Quality.

Postby WOOLIFERKINS » 17 Dec 2014, 1:35pm

You don't need to do your warranty with B&M direct just take them back to the retailer you got them from and they will sort warranty with the UK distributor
Neil

User avatar
meic
Posts: 19355
Joined: 1 Feb 2007, 9:37pm
Location: Caerfyrddin (Carmarthen)

Re: B&M Quality.

Postby meic » 17 Dec 2014, 1:44pm

I had bought it at an address in Germany and now live in the UK.
It was over 2 years since I bought it and the dealer said mine pre-dated the lifetime guarantee.
Also that would have made an even longer chain of transport and yet more time without my light.
All with the chance that they might not give me a decent light at the end of it anyway.
Then on past experience, I would be doing it again before too long.
Yma o Hyd

WOOLIFERKINS
Posts: 134
Joined: 11 Apr 2008, 10:39pm
Location: Oxon

Re: B&M Quality.

Postby WOOLIFERKINS » 17 Dec 2014, 1:45pm

Ah, I see. B&M have a two year warranty not lifetime
Neil

User avatar
meic
Posts: 19355
Joined: 1 Feb 2007, 9:37pm
Location: Caerfyrddin (Carmarthen)

Re: B&M Quality.

Postby meic » 17 Dec 2014, 1:59pm

When the light first failed they were repairing all Ixon IQs without question as they knew it had an inherent flaw. I assume they valued their good name. Something had changed by the time it failed again.

I do think at some point they were giving a five year guarantee, I see my latest packaging doesnt say so and possibly it was my first light that had a five year guarantee and it had since changed to two. Which was the guarantee problem that I remember, with me being bounced between manufacturer and retailer until the retailer said they would act as if it was a five year guarantee and pass it to B&M as requested.
Yma o Hyd

WOOLIFERKINS
Posts: 134
Joined: 11 Apr 2008, 10:39pm
Location: Oxon

Re: B&M Quality.

Postby WOOLIFERKINS » 17 Dec 2014, 4:24pm

The very first Ixons had a latch flaw which was dealt with with a redesign 7/8 years ago from memory. To the best of my knowledge B&M (as an ex retailer) were only two years as with all their products but I'll agree to differ. Usually outside the warranty period they will fix their products at a reasonable cost. Although I appreciate it going back and forward gets a little OTT on the less expensive lights. In 7 years as a retailer I had a couple of 1st generation Ixons back with the clasp problem. Other than that usually Senso's and very few of them. We sold hundreds of B&M products every year and returns were only ever in single figures each year
Neil