Bottom bracket for Stronglight 49D...
Bottom bracket for Stronglight 49D...
I have a double chainring Stronglight 49D crankset. Could anyone suggest a likely spindle length; I accept that I will have to start somewhere and maybe make a future change. I think this requires an ISO BB ?
-
- Posts: 3435
- Joined: 10 Jul 2014, 1:12pm
- Location: Norfolk
Re: Bottom bracket for Stronglight 49D...
I think it will be a 122mm, but await correction.
Re: Bottom bracket for Stronglight 49D...
no, not an ISO BB I think. Old stronglights were different to that. The length I'm not sure of but 122mm sounds familiar.
cheers
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: Bottom bracket for Stronglight 49D...
had found much conflicting info elsewhere but just found this also:
https://www.flickr.com/groups/1402716@N ... 171144305/
https://www.flickr.com/groups/1402716@N ... 171144305/
Re: Bottom bracket for Stronglight 49D...
suggesting JIS 118 to 121mm
Re: Bottom bracket for Stronglight 49D...
Don't know exactly what length you need but I do have some
old ,some worn, some good con. spindles and cups.
I don't want to throw these out and plan to eventually forward them
to a Norwich ctc member.
Let me know what length you need and you pay post.
old ,some worn, some good con. spindles and cups.
I don't want to throw these out and plan to eventually forward them
to a Norwich ctc member.
Let me know what length you need and you pay post.