mtb tyre pressure for road use

For discussions about bikes and equipment.
Sparks
Posts: 1
Joined: 3 Feb 2015, 5:48pm

mtb tyre pressure for road use

Postby Sparks » 3 Feb 2015, 6:42pm

Hi am new on here. Been cycling again after a 30 yr absence. Bought a 27.5''mtb 6 months ago am am loving it however am finding it difficult to find advice in what tyre pressures to run on my 27.5 x 2.25's. Am currently at 45 rear &35 front as mostly on road. Any advive welcone. Seem to be very prone to rear punctures tho!

User avatar
cycleruk
Posts: 5160
Joined: 17 Jan 2009, 9:30pm
Location: Lancashire

Re: mtb tyre pressure for road use

Postby cycleruk » 3 Feb 2015, 7:32pm

Quite often there is a recommended maximum pressure embossed on the tyre wall.
Personally I would pump them up as hard as I felt comfortable with for road use.
MTB tyres on the road will be a "drag" especially if soft so I have fitted "slicks" on mine.
Much easier to pedal and a lot less noise. I usually pump upto about 60/70 psi in these.
There's no such thing as a tailwind.
It's either a headwind, or you're going well.

robing
Posts: 1022
Joined: 7 Sep 2014, 9:11am

Re: mtb tyre pressure for road use

Postby robing » 3 Feb 2015, 7:44pm

Yep, pump them up to the max for road use. Probably 50 to 60 psi. You might also want to change your knobbly tyres for more slick ones.

sreten
Posts: 347
Joined: 29 Sep 2013, 10:59pm

Re: mtb tyre pressure for road use

Postby sreten » 4 Feb 2015, 1:34am

Hi,

Higher tyre pressures won't help 2.25" tyres on the road, 45 and 35 psi is plenty.

Any tyre with a good MTB tread will be very poor ridden mainly on road,
the only upside is they will get better as you wear the central knobblies.

27.5" is really 650B, 584mm, with limited tyre choices, it will get better.

http://www.sjscycles.co.uk/schwalbe-hs315-rigid-tyre-26-x-1-2-x-2-inch-(54-584)-prod30880/

Is a suitably fat road tyre, note that maximum pressure is 45 psi,
and if you don't weigh much the best real pressure is lower.
Puncture protection is Kevlarguard, and it works very well.

rgds, sreten.

reohn2
Posts: 35291
Joined: 26 Jun 2009, 8:21pm

Re: mtb tyre pressure for road use

Postby reohn2 » 4 Feb 2015, 9:54am

robing wrote:Yep, pump them up to the max for road use. Probably 50 to 60 psi. You might also want to change your knobbly tyres for more slick ones.

:shock:

Ain't no way I'd ride those kind of pressures in 650Bx2.25in tyres for road use,especially on wet/mucky lanes.
40psi rear, 25 to 30 psi front maybe for road type tyres depending on load.
Outright knobblies for road use offer some 'interesting' handling characteristics :shock:
-----------------------------------------------------------
I cycle therefore I am.

pwa
Posts: 9871
Joined: 2 Oct 2011, 8:55pm

Re: mtb tyre pressure for road use

Postby pwa » 4 Feb 2015, 10:19am

If you don't ride on anything more off-roady than reasonably well surfaced tracks you might be better of with tyres that don't have knobbles. If you change your tyres, choose ones that will inflate to about 60 - 65 psi and pump them up to that pressure. Knobbly tyres are like football boots, giving good grip on soft turf but poor grip and poor rolling on hard surfaces.

User avatar
al_yrpal
Posts: 7572
Joined: 25 Jul 2007, 9:47pm
Location: Cully
Contact:

Re: mtb tyre pressure for road use

Postby al_yrpal » 4 Feb 2015, 10:57am

Buy some Schwalbe Land Cruisers. http://www.chainreactioncycles.com/schw ... -prod24622
Very cheap but excellent tyres for mixed road and off road. The continuous centre bead will speed you right up on the road and the nobbles on either side will provide plenty of grip off road on softer surfaces. At the moment you are going a lot slower with more effort expended than you could. The right pressure is embossed on the side of the tyres.

Al
Touring on a bicycle is a great way to explore and appreciate the countryside and towns you pass through. CTC gone but not forgotten!

Brucey
Posts: 34853
Joined: 4 Jan 2012, 6:25pm

Re: mtb tyre pressure for road use

Postby Brucey » 4 Feb 2015, 12:59pm

for MTBs that mostly see road use with occasional off-road I have gravitated towards using a road-biased rear tyre (maybe a semi-slick) and something knobblier at the front.

With this arrangement you (predictably) can't corner hard on the road (the front will wash out or worse) so you need to be careful. But then again you won't lose the front end offroad in the mud, (which is how a lot of prangs happen).

The performance on the road will (if you have a typical 65-35 weight split R-F) be OK; not brilliant, but OK.

From that starting point, add more knobbles for more offroad grip, and use fewer for better on-road manners. It is all a trade-off. Tyre pressures as you feel works best really; again you may not want them as hard offroad as on.

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~

Kaysbloke
Posts: 102
Joined: 2 Apr 2008, 2:35pm
Location: Wakefield, West Yorkshire

Re: mtb tyre pressure for road use

Postby Kaysbloke » 4 Feb 2015, 4:41pm

In the early 90's I occasionally rode our club 10's on my MTB with knobbblies and pumped them up to around 60/65 psi. They still had a certain amount of drag compared to slicks - but the road noise was terrific at speed!

Calder10TT1991.A.jpg


I've still got that jersey.

But it's rather more difficult to put on these days...........................
I don't know where I'm going but I'll always tell you where I am.