SHIMANO LX Front Hub spare outer cones

For discussions about bikes and equipment.
cjs
Posts: 146
Joined: 4 Dec 2011, 10:13am

SHIMANO LX Front Hub spare outer cones

Postby cjs » 21 Aug 2015, 5:54pm

Hi,

Halfway through a tour (Ireland, Hebrides, Holland etc..) and currently in Holland.. The front hub gave some bother a while back and investigation shows one of the outer cones is done.

Anyway, the rather extensive and expensive LBS gave me a pair of replacement cones that apparently they reckoned would do but these are not right... Once adjusted for play the OD is far to small... they have no idea how long to get a manufacturers replacement in...

Anyone know a UK shop likely to have them in and wiling to post. I do not fancy the idea of a new hub and rebuilding the Spa HB wheel....

Google does not seem to throw anything up...
Kind Regards
Chris...

cjs
Posts: 146
Joined: 4 Dec 2011, 10:13am

Re: SHIMANO LX Front Hub spare outer cones

Postby cjs » 21 Aug 2015, 6:31pm

Sorted... just ordered a new LX hub for 20 euros delivered from Rose Bikes... just use the cones - done.

The wrong cones from the LBS were 14 euros...!
Kind Regards
Chris...

User avatar
DaveP
Posts: 3227
Joined: 9 Mar 2007, 4:20pm
Location: W Mids

Re: SHIMANO LX Front Hub spare outer cones

Postby DaveP » 21 Aug 2015, 6:35pm

I reckon these guys could be your best chance:
http://www.sjscycles.co.uk/shimano-hub- ... pt422_pg1/

Your second post appeared while I was typing - you still need a pair of cones for the new hub,, right?
Trying to retain enough fitness to grow old disgracefully...

User avatar
recordacefromnew
Posts: 333
Joined: 21 Dec 2012, 3:17pm

Re: SHIMANO LX Front Hub spare outer cones

Postby recordacefromnew » 21 Aug 2015, 7:02pm

cjs wrote:Sorted... just ordered a new LX hub for 20 euros delivered from Rose Bikes... just use the cones - done.


Hope the new hub you ordered has compatible cones - there have been numerous LX front hub models, many with different cones. For example, the m570 and m571 cones are vastly different.

If the hub from Rose has the same model code then you should be fine, if not you might want to post the two model codes.

cjs
Posts: 146
Joined: 4 Dec 2011, 10:13am

Re: SHIMANO LX Front Hub spare outer cones

Postby cjs » 21 Aug 2015, 8:04pm

@DaveP - thanks for the response... but the new hub is in the post... I had look at that link before posting and could not see the model I need ...

@recordacefromnew - thanks for the response... hopefully it will be fine.. its a SHIMANO Deore LX HB-T670 - same as original except colour - so fingers crossed - otherwise I swapping out the hubs complete...
Kind Regards
Chris...

Brucey
Posts: 35941
Joined: 4 Jan 2012, 6:25pm

Re: SHIMANO LX Front Hub spare outer cones

Postby Brucey » 21 Aug 2015, 8:48pm

apologies if this is b-obvious but do be sure that you are adjusting the bearings correctly. The correct adjustment is when there is a little free play in the hub when the QR is just nipped, that just disappears when the QR is fully tightened. Obviously the locknuts should be tight against the cones.

IME if hubs are adjusted thus, they only ever give any trouble if the water gets inside.

BTW NB; with some shimano front hubs it is possible to assemble the front hub badly, so that the balls sit in the wrong part of the hubshell. This rarely ends well...!

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~