Opinions on this motor drive on tyre itself

Electrically assisted bikes, trikes, etc.
stodd
Posts: 52
Joined: 6 Jun 2018, 10:24am

Re: Opinions on this motor drive on tyre itself

Postby stodd » 20 Dec 2018, 10:09am

Possibly not at hill climbing speed.
Unless the very fit user is able to provide 750w up the hills to keep the speed up and the motor working at its best? But maybe then she wouldn't want the motor anyway.

hemo
Posts: 294
Joined: 16 Nov 2017, 5:40pm
Location: West Sussex

Re: Opinions on this motor drive on tyre itself

Postby hemo » 20 Dec 2018, 11:35am

The Revo's friction drive can be engaged at will as the system uses a sensor to do this, 1/4 back pedal to engage and dis-engage unit.
So ideal if you only need the extra power on inclines, range is small (largest capacity is 208wh using 10a rated Panasonic PF cells) but a sensible rider could manage 80/100 miles or more for slight weight increase of 5lbs. Tyre wear is possible to manage better if not permanently engaged.

According to the developers the motors is totally and probably the only real legal one out there ? They say it is programmed for 250w through out the whole rpm range. The controller is 14a max rated x 24v = 336w output allowing for motor inefficacy, the possible that the max measured output is 250w if efficacy loss was 25%. Most hub and mid drive motors have an efficacy loss of 20 - 25%.

Deliveries are being made now (albeit behind schedule) originally they planned on shipping 15 units out to backers this year but only 5 will be sent by year end, the next batch by mid Jan.
Last edited by hemo on 20 Dec 2018, 11:54am, edited 1 time in total.

Vorpal
Moderator
Posts: 16299
Joined: 19 Jan 2009, 3:34pm
Location: Not there ;)

Re: Opinions on this motor drive on tyre itself

Postby Vorpal » 20 Dec 2018, 11:39am

There is a reason that bike drive trains are chains and sprockets.
“In some ways, it is easier to be a dissident, for then one is without responsibility.”
― Nelson Mandela, Long Walk to Freedom

hemo
Posts: 294
Joined: 16 Nov 2017, 5:40pm
Location: West Sussex

Re: Opinions on this motor drive on tyre itself

Postby hemo » 20 Dec 2018, 11:40am

stodd wrote:
Possibly not at hill climbing speed.
Unless the very fit user is able to provide 750w up the hills to keep the speed up and the motor working at its best? But maybe then she wouldn't want the motor anyway.



A couple of promo videos show a rider climbing inclines in Bristol effortlessly ( one said to be 10%) including a wet ride, though agree rider probably needs to be able to have good input. Without riding th system it would be harsh to judge it as it appears the team have spent some time desingning, developing and testing it to bring it to the market.