Hi, I'm in need of technical help and it's my 1st time post on the forum - forgive me if my etiquette is awful.
I have a Tongsheng TSDZ2 mid-drive motor with a VLCD6 controller working well, however its functionality is limited so I purchased an 850c controller which has been sold to me as compatible with the TSDZ2. The plug shape and pins will allow the cable to connect but I am assuming the speed control extension cable is a straight through pinout i.e. no internal cable wiring crosses over to different pins.
In a nutshell the cable length is too short to reach the motor connector so can I simply connect a speed sensor extension cable to extend the cable to motor and 850c?
Any help or definitive answers much appreciated.
Connecting a Tongsheng TSDZ2 to an 850c controller display
-
- Posts: 2
- Joined: 30 Apr 2021, 9:39pm
- Location: N. London
Connecting a Tongsheng TSDZ2 to an 850c controller display
My rockets never blew up, buy strangely I never found some of them again.
Re: Connecting a Tongsheng TSDZ2 to an 850c controller display
I'm afraid I can't help directly, but try asking at https://www.pedelecs.co.uk/forum/forums ... ussion.42/
A much more technical crowd there.
A much more technical crowd there.
-
- Posts: 2
- Joined: 30 Apr 2021, 9:39pm
- Location: N. London
Re: Connecting a Tongsheng TSDZ2 to an 850c controller display
Thanks for the link. I've had a quick look and it sure does look technical.
Best Wishes
Best Wishes
My rockets never blew up, buy strangely I never found some of them again.