Ti Build started...

For discussions about bikes and equipment.
User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Ti Build started...

Postby 100%JR » 11 Feb 2020, 4:28pm

OK so it's only the BB/Headset and Bars but at least it's started :mrgreen:

Next step post and saddle.Almost 100% set on a Brooks Cambium C17.Thinking brown with brown bar tape but not sure the Retro-look will go with the integrated Aero stem/bars........That said it'll have ETAP etc so may a touch of retro will look OK...

Image
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!

mattsccm
Posts: 2916
Joined: 28 Nov 2009, 9:44pm

Re: Ti Build started...

Postby mattsccm » 11 Feb 2020, 6:50pm

I used brown and brown on my Ti bike. Not a very good look . A bit dull. Bight works well I reckon.

hamster
Posts: 3314
Joined: 2 Feb 2007, 12:42pm

Re: Ti Build started...

Postby hamster » 11 Feb 2020, 8:02pm

I used brown and brown on my Litespeed; love it whispers quality rather than shouts. Different strokes for different folks, clearly! 8) But it is one of the early ones with yellow lettering.

pwa
Posts: 11603
Joined: 2 Oct 2011, 8:55pm

Re: Ti Build started...

Postby pwa » 11 Feb 2020, 8:10pm

It already has black and silver. Just continue with that. Black Cambium with silver rails. Anything else with either black or silver. Easy.

User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Re: Ti Build started...

Postby 100%JR » 11 Feb 2020, 8:38pm

mattsccm wrote:I used brown and brown on my Ti bike. Not a very good look . A bit dull. Bight works well I reckon.

I’m not keen on bright.Plenty of that on my riding kit.
pwa wrote:It already has black and silver. Just continue with that. Black Cambium with silver rails. Anything else with either black or silver. Easy.

I usually have white saddles/helmet/shoes and black&white tape.I fancy something a bit different.I once had brown saddle/grips on a MTB and I didn’t mind it.I’ve a spare white saddle I’ll try but I don’t think it goes with the frame.
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!

User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Re: Ti Build started...

Postby 100%JR » 12 Feb 2020, 11:42pm

Ordered a brown Cambrium C17.
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!

Jamesh
Posts: 897
Joined: 2 Jan 2017, 5:56pm

Re: Ti Build started...

Postby Jamesh » 14 Feb 2020, 7:35am

Classy saddle on a classy frame!!

Cheers James

Fairweather
Posts: 59
Joined: 14 Feb 2020, 12:43pm

Re: Ti Build started...

Postby Fairweather » 14 Feb 2020, 12:46pm

I'm planning a similar project. What weight are you aiming for at the end build?

User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Re: Ti Build started...

Postby 100%JR » 15 Feb 2020, 10:05pm

Fairweather wrote:I'm planning a similar project. What weight are you aiming for at the end build?

Not that fussed TBH.If it weighs somewhere between my Canyon Ultimate CF SL and my Boardman CX Comp I'll be happy.
I should think 16lbs shouldn't be too difficult to achieve with Carbon wheels.
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!

Fairweather
Posts: 59
Joined: 14 Feb 2020, 12:43pm

Re: Ti Build started...

Postby Fairweather » 16 Feb 2020, 9:21am

The reason I'm asking is I'm torn between a very light use Lightspeed and your frame. My current disc bike is 28lbs and I'd really like to put one together under 20 as I spend a lot of time lugging it on and off trains and into inaccessible bike racks!

User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Re: Ti Build started...

Postby 100%JR » 16 Feb 2020, 9:32am

Fairweather wrote:The reason I'm asking is I'm torn between a very light use Lightspeed and your frame. My current disc bike is 28lbs and I'd really like to put one together under 20 as I spend a lot of time lugging it on and off trains and into inaccessible bike racks!

28lbs!!!! That’s Full suss MTB territory :shock: Is that just the bike or including bags/racks/panniers?
The R480 Frame/fork is around 1.3kg IIRC.
You’ll not go far wrong with either the Litespeed or the R480.Even with low end/midrange parts I’m sure you could achieve sub 20lbs.
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!

User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Re: Ti Build started...

Postby 100%JR » 6 Mar 2020, 11:03pm

Di2 STi's and Callipers fitted :cool:

Image

Image

I'll thread/cut/connect them next.
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!

Jamesh
Posts: 897
Joined: 2 Jan 2017, 5:56pm

Re: Ti Build started...

Postby Jamesh » 7 Mar 2020, 8:25am

Looking good!

Cheers James

Brucey
Posts: 37238
Joined: 4 Jan 2012, 6:25pm

Re: Ti Build started...

Postby Brucey » 7 Mar 2020, 9:54am

curious minds want to know if you are planning to use the microwave or the gas hob to finish it off. [Mind you, it is obvious really, it won't fit in the microwave.... :roll: ]

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~

User avatar
100%JR
Posts: 1138
Joined: 31 May 2016, 10:47pm
Location: High Green,Sheffield.

Re: Ti Build started...

Postby 100%JR » 7 Mar 2020, 3:24pm

Brucey wrote:curious minds want to know if you are planning to use the microwave or the gas hob to finish it off. [Mind you, it is obvious really, it won't fit in the microwave.... :roll: ]

cheers

:D
Always build bikes in the kitchen........easier to get a cuppa etc 8)
Canyon Ultimate CF SL
Lynskey R480 build
Boardman CX Comp

We hate "speed" cameras...and mass hysteria..Vive la révolution!!