Under chain stay U brakes

For discussions about bikes and equipment.
nez
Posts: 1840
Joined: 19 Jun 2008, 12:11am

Under chain stay U brakes

Postby nez » 28 Jul 2020, 7:52pm

We have an old Saracen Blizzard with a peculiar 1980s 'under the chain stay' braking arrangement. Essentially it's a U brake like the ones you'd find on BMX. Of course setting that sort of brake depends on the spring-back and that's nearly impossible to adjust properly on the el cheapo U brakes I bought at first. Is there a 'go-to' marque of U brake which is reliable and of decent quality?

rualexander
Posts: 2418
Joined: 2 Jul 2007, 9:47pm
Contact:

Re: Under chain stay U brakes

Postby rualexander » 28 Jul 2020, 9:31pm

Not particularly peculiar, they were standard on most mountain bikes back in the late '80's.

Dia Compe one available on ebay https://www.ebay.co.uk/itm/183848897686

zenitb
Posts: 391
Joined: 7 Aug 2018, 9:59pm
Contact:

Re: Under chain stay U brakes

Postby zenitb » 28 Jul 2020, 9:42pm

Key thing to check is that you are not using v-brake levers .. sounds like U brakes used the same ones as cantilever brakes used to use .. with a different leverage ratio. Sheldon Brown has a section on them that might be helpful ? https://www.sheldonbrown.com/canti-u.html

nez
Posts: 1840
Joined: 19 Jun 2008, 12:11am

Re: Under chain stay U brakes

Postby nez » 28 Jul 2020, 9:45pm

Thanks for these hint. I don't think mine are any good - I watched set-up videos on Youtube and people def have more spring resistance than I can raise on them.
Thanks

PT1029
Posts: 906
Joined: 16 Apr 2012, 9:20pm

Re: Under chain stay U brakes

Postby PT1029 » 29 Jul 2020, 8:53am

Some makes of U brake had the Dia Compe style centering method, loosen the boss bolt, turn the inner bit that had the spring in it (usually use a cone spanner for this) and the retighten the boss bolt. This applied to both sides, so you could set the springs on both sides too slack, giving poor spring tension.
If you look at the e bay link, you can see the spanner flats on each pivot, just below the cable end cap/XCE label.
You will also get poor spring tension if the boss pivots are rusty/gunged up, in which case they'll need cleaning/greasing.

Brucey
Posts: 40575
Joined: 4 Jan 2012, 6:25pm

Re: Under chain stay U brakes

Postby Brucey » 29 Jul 2020, 12:53pm

PT1029 wrote:…..You will also get poor spring tension if the boss pivots are rusty/gunged up, in which case they'll need cleaning/greasing...


if...???? :shock: :shock:

what is this 'if'....?

I remember shopping for a new MTB when these were 'the latest thing'. Needless to say I "politely declined" (*) the offer of a similarly equipped machine and happily bought the 'old fashioned' previous year's model which had the brake on the seatstays... I thought the U brake was an absurd idea for typical UK conditions and that is how it turned out. Hopeless things.

(*) I think I may have come within a hair's breadth of telling the salesman to " **** off and stop talking b******s"….

However they can be made to work OK for at least, ooooh, five minutes or so provided the springs are correctly set up and the pivots are greased.

If we see photos of the parts, advice on correct setup can be given.

cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~

nez
Posts: 1840
Joined: 19 Jun 2008, 12:11am

Re: Under chain stay U brakes

Postby nez » 29 Jul 2020, 3:04pm

I was young and easily led. I’ll post a picture when the bike is next here -maybe the weekend. I am the amateur mechanic for my grown up kids bikes... when they are born no one tells you ´and in nearly 40 years you’ll still be fixing their bikes’

rualexander
Posts: 2418
Joined: 2 Jul 2007, 9:47pm
Contact:

Re: Under chain stay U brakes

Postby rualexander » 29 Jul 2020, 4:28pm

I used a Saracen Trekker mtb converted for touring use with drop bars etc. for 20 years between 1989 and 2009.
Travelled all over the world with it in all sorts of weather and road conditions.
It had a U brake under the chainstays, never any problem really.

Pneumant
Posts: 185
Joined: 7 Oct 2010, 8:25pm

Re: Under chain stay U brakes

Postby Pneumant » 29 Jul 2020, 6:28pm

There ought to be a thread for spurious parts fitted to bikes by marketing departments :roll: The U brake lasted a year or two on MTBs with consumers wising up long before they were dropped. Sadly I was not one of those people and owned a 1987 MTB with a Dia Compe U Brake. This brake was perfectly placed to collect mud / filth/water requiring far more (regular) TLC than a seatstay mounted cantilever set. Brake performance no better than a cantilever either, if anything it felt like a big spongy centrepull brake which is, in fact, exactly what it was .

nez
Posts: 1840
Joined: 19 Jun 2008, 12:11am

Re: Under chain stay U brakes

Postby nez » 29 Jul 2020, 6:40pm

I agree with those who 'diss' the U brake located under the bottom stay - but the trouble is I don't see a way of replacing it with, say, a cantilever without paying for posts to be brazed elsewhere - probably equalling the value of the bike. Interestingly on those weird little trick bikes that use them nowadays the rear brake is often located under the upper stay. I'm hoping I've added a picture found on t'internet to demonstrate.
Image Attachments
image.png
image.png (76.97 KiB) Viewed 306 times

cycle tramp
Posts: 841
Joined: 5 Aug 2009, 7:22pm

Re: Under chain stay U brakes

Postby cycle tramp » 29 Jul 2020, 9:27pm

...Are still available, at least for BMXs. I guess in many ways the u-brake came about because in many ways putting a pair of brake bosses on the chain stay (usually considered more stiff, than the seat stays) and closer to the braced area would mean there's less braking force lost by frame deflection...
..in theory anyway..
..I guess in practice the design only worked in sunny America where mud was relatively unknown... here in muddy blighty things might have been some what different as the brakes collected every piece of crud thrown up by both the front and back wheel....
..however in bmx land the design has improved and developed - most of the designs seem to have the adjusters, operated by scanners and fixed on the 'bolt' (or non-frame) side of the brake arms (if that makes sense). Who knows with a decent set of mudguards to keep them clean u-brakes could be one of the ultimate rim brakes for touring bikes...

nez
Posts: 1840
Joined: 19 Jun 2008, 12:11am

Re: Under chain stay U brakes

Postby nez » 11 Aug 2020, 2:20pm

IMG_0416.JPG
Finally - photos. From which you may judge the bike doesn't live with me...
I have made the brakes work but whatever I do I can't make them spring away from the rim with some vim and vigour. What I'd really like to do is replace them with something else, but I don't see any other form of brake working down there any better
Image Attachments
IMG_0415.JPG

Jdsk
Posts: 2418
Joined: 5 Mar 2019, 5:42pm

Re: Under chain stay U brakes

Postby Jdsk » 11 Aug 2020, 2:25pm

nez wrote:I have made the brakes work but whatever I do I can't make them spring away from the rim with some vim and vigour.

What do they do without the cable attached ? And what do the pivots feel like when you work them by hand? (See above.)

Jonathan
Last edited by Jdsk on 11 Aug 2020, 2:29pm, edited 1 time in total.

nez
Posts: 1840
Joined: 19 Jun 2008, 12:11am

Re: Under chain stay U brakes

Postby nez » 11 Aug 2020, 2:29pm

They're not bad at the hand-pull. The pivots are clean and greased. A lot of people would say 'there's nothing wrong with those' I think, but I put the bike back on the road for a mechanically incompetent and skint son, so I don't want to leave him with brakes which are a bit cr*p.

Pneumant
Posts: 185
Joined: 7 Oct 2010, 8:25pm

Re: Under chain stay U brakes

Postby Pneumant » 11 Aug 2020, 3:00pm

Assuming you have the L & R springs matched to the caliper arms?! To adjust & if memory serves me correctly use a spanner on the hex to move/tension the caliper arm away from the rim then tighten the cap bolt.