Howdy everyone, I'm looking for a pair of bars that have the same short reach as these but in silver. Must be 26.0-26.4mm...
http://www.dedaelementi.com/en/piega/
Any ideas? Ideally with double cable grooves to facilitate 9 speed Campagnolo ergo levers.
Alternative to Deda Piega bars
Re: Alternative to Deda Piega bars
I'm not too sure about the short reach requirement, but I went from an RHM01 to a Speciale without too much trouble. http://www.dedaelementi.com/en/speciale-26/
Bill
“Ride as much or as little, or as long or as short as you feel. But ride.” ~ Eddy Merckx
It's a rich man whos children run to him when his pockets are empty.
“Ride as much or as little, or as long or as short as you feel. But ride.” ~ Eddy Merckx
It's a rich man whos children run to him when his pockets are empty.
Re: Alternative to Deda Piega bars
My Moulton TSR came with those.
One, they were ukky black, and two, they were too wide .......... so I sold them.
I bought Deda Speciale in silver and 42mm wide.
Same diameter as the Piega.
The Deda pages don't list their widths.
Bought mine from Spa ......... who do.
https://www.spacycles.co.uk/m9b0s90p344 ... I-Speciale
Much much MUCH!! nicer.
One, they were ukky black, and two, they were too wide .......... so I sold them.
I bought Deda Speciale in silver and 42mm wide.
Same diameter as the Piega.
The Deda pages don't list their widths.
Bought mine from Spa ......... who do.
https://www.spacycles.co.uk/m9b0s90p344 ... I-Speciale
Much much MUCH!! nicer.
Mick F. Cornwall
Re: Alternative to Deda Piega bars
I happily went from Deda RHM to FSA Compact.
Note how manufacturers have different ways of measuring/denoting width.
Note how manufacturers have different ways of measuring/denoting width.
I should coco.
-
- Posts: 842
- Joined: 2 Nov 2015, 12:51pm
- Location: Sunny Devon! just East of the Moor
Re: Alternative to Deda Piega bars
The only other silver compact shape bars with 26.0 clamp that I’m aware of are SOMA Highway 1.
There’s supposedly some compact Nitto bars with a 26.0 clamp but I’ve never come across them in the flesh in the UK.
There’s supposedly some compact Nitto bars with a 26.0 clamp but I’ve never come across them in the flesh in the UK.
Re: Alternative to Deda Piega bars
You could try looking qt the Planet X website. They seem to have lots of silver handlebars.
- speedsixdave
- Posts: 868
- Joined: 19 Apr 2007, 1:48pm
- Location: Ashbourne, UK
Re: Alternative to Deda Piega bars
Nitto M106 might do it for you, Here at Planet X but sold out...
Big wheels good, small wheels better.
Two saddles best!
Two saddles best!
Re: Alternative to Deda Piega bars
True, but basically only two ways.Valbrona wrote:Note how manufacturers have different ways of measuring/denoting width.
Centre-to-centre, or outside-to-outside.
My Cinneli 64-40 on Mercian measure centre-to-centre 40cm, but outside-to-outside are 42cm ............ and my Deda were bought for Moulton as listed at 42mm outside-to-outside. Consequently, they are both the same size. Also both the same shape.
When you get to flared drops, they probably list them as outside-to-outside at their widest part.
Mick F. Cornwall