where to find a match for this swept back bar

[nomm]

I am converting a step through for someone, I have done some digging without much luck, but I am trying to find as close as possible to -

Width 570mm, 66mm Rise, 43 degree Sweep, 25.4 clamp - chrome/silver only

[hemo]

Planetx sell a variety of Nitto bars but none with those exact specs.

[reohn2]

Sjs cycles have a very large varied selection.

[freeflow]

You could try looking in https://whatbars.com/

[Brucey]

a picture is worth a thousand words?

cheers

[Paulatic]

Zoom Cruiser ?
https://www.amazon.co.uk/Zoom-Cruiser-H ... B07NMD76WL
There is one only left on EBay in the USA

[Mike_Ayling]

Do you want something like this?

https://www.moruyabicycles.com.au/conte ... Alloy.html

[NUKe]

Not quite your spec but very nearly
https://www.rosebikes.co.uk/ergotec-moo ... e=Standard

[grufty]

Ergotec Stuttgarter? Perhaps too much backsweep?

[pwa]

There is quite a range of bars at SJS, for example:
https://www.sjscycles.co.uk/handlebars/ ... ver-480mm/
But whether they have a good match for what you need, I don't know.

[nomm]

Not quite your spec but very nearly
https://www.rosebikes.co.uk/ergotec-moo ... e=Standard

closest so far!

[gregoryoftours]

I am converting a step through for someone, I have done some digging without much luck, but I am trying to find as close as possible to -

Width 570mm, 66mm Rise, 43 degree Sweep, 25.4 clamp - chrome/silver only

Photo please, it makes things much easier to recognise the general shape first and then check the specs. Saves people's time and effort. Or is this from the bike specs and you don't have the bar that needs replacing?

[nomm]

I am converting a step through for someone, I have done some digging without much luck, but I am trying to find as close as possible to -

Width 570mm, 66mm Rise, 43 degree Sweep, 25.4 clamp - chrome/silver only

Photo please, it makes things much easier to recognise the general shape first and then check the specs. Saves people's time and effort. Or is this from the bike specs and you don't have the bar that needs replacing?

Its ok I have ordered one now - thanks for everyones help!!

[Bmblbzzz]

You could try looking in https://whatbars.com/

That's a fun site, potentially useful too.