Acor averhallo handlebar riser wider lower 25.4mm tubing?
Acor averhallo handlebar riser wider lower 25.4mm tubing?
It occurred to me that a wider lower 25.4mm tube on the
Acor averhallo handlebar riser coukld make a useful lamp mount?
Where would one find a source of suitably strong tube,?
A 25.4mm steel ? seatpost?
Acor averhallo handlebar riser coukld make a useful lamp mount?
Where would one find a source of suitably strong tube,?
A 25.4mm steel ? seatpost?
------------You may not use this post in Cycle or other magazine ------
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
There are lots of lamp mounts like that available anyway. For example, SJS Cycles.
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
But I do need the acor riser as a riser as well...
------------You may not use this post in Cycle or other magazine ------
-
- Posts: 2240
- Joined: 22 May 2011, 7:14pm
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
SA_SA_SA wrote:But I do need the acor riser as a riser as well...
Google does not find the averhallo, can you post a picture of what you mean?
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
Aberhallo
https://www.ebay.co.uk/itm/SATORI-Aberhallo-Adjust-Angle-Riser-25-4mm-Handlebar-Stem-/292185802083
https://www.ebay.co.uk/itm/SATORI-Aberhallo-Adjust-Angle-Riser-25-4mm-Handlebar-Stem-/292185802083
------------You may not use this post in Cycle or other magazine ------
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
SA_SA_SA wrote:It occurred to me that a wider lower 25.4mm tube on the
Acor averhallo handlebar riser coukld make a useful lamp mount?
Where would one find a source of suitably strong tube,?
A 25.4mm steel ? seatpost?
Why not cut down an old set of handlebars?
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
I didn't think the 25.4 bulge would be wide enough.
------------You may not use this post in Cycle or other magazine ------
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
SA_SA_SA wrote:I didn't think the 25.4 bulge would be wide enough.
Plenty available. It's what it's designed for.
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
You can buy lamp mounts that replicate bar widths, including some with holes and threads IIRC.
https://www.sjscycles.co.uk/front-light-brackets/
Jonathan
https://www.sjscycles.co.uk/front-light-brackets/
Jonathan
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
25.4mm (1") OD tubing is available from any metal supplier.
cheers
cheers
-------------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~Brucey~~~~~~~~~~~~~~~~~~~~~~~~
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
Brucey wrote:25.4mm (1") OD tubing is available from any metal supplier.
cheers
I have found "metal mania" easy to deal with over the 'net. https://www.metalmaniauk.com/Stainless-Steel/Tube/default.aspx
They list ali and stainless tube in inch/25.4mm diameter ...any force you put through the bars will also go through this bit of tube, which won't be highly specified ;it needs to be thick enough to cope. Similarly, your existing bars will be clamped in an area they don't expect to be clamped, I don't know if this can be a problem.
Bike fitting D.I.Y. .....http://wheel-easy.org.uk/wp-content/uploads/bike-set-up-2017a.pdf
Tracks in the Dales etc...http://www.flickr.com/photos/52358536@N06/collections/
Tracks in the Dales etc...http://www.flickr.com/photos/52358536@N06/collections/
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
SA_SA_SA wrote:Aberhallo
https://www.ebay.co.uk/itm/SATORI-Aberhallo-Adjust-Angle-Riser-25-4mm-Handlebar-Stem-/292185802083
Have you seen the postage?
Bike fitting D.I.Y. .....http://wheel-easy.org.uk/wp-content/uploads/bike-set-up-2017a.pdf
Tracks in the Dales etc...http://www.flickr.com/photos/52358536@N06/collections/
Tracks in the Dales etc...http://www.flickr.com/photos/52358536@N06/collections/
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
iandusud wrote:SA_SA_SA wrote:I didn't think the 25.4 bulge would be wide enough.
Plenty available. It's what it's designed for.
I meant the bulge needs to be wider than I have seen on handlebars in order to suit the wider lower part of the aberhallo.
531colin wrote:SA_SA_SA wrote:Aberhallo
https://www.ebay.co.uk/itm/SATORI-Aberhallo-Adjust-Angle-Riser-25-4mm-Handlebar-Stem-/292185802083
Have you seen the postage?
I already have one so no, I just picked that link for the photo.
531colin wrote:Brucey wrote:25.4mm (1") OD tubing is available from any metal supplier.
cheers
I have found "metal mania" easy to deal with over the 'net. https://www.metalmaniauk.com/Stainless-Steel/Tube/default.aspx
They list ali and stainless tube in inch/25.4mm diameter ...any force you put through the bars will also go through this bit of tube, which won't be highly specified ;it needs to be thick enough to cope. Similarly, your existing bars will be clamped in an area they don't expect to be clamped, I don't know if this can be a problem.
Thanks, but⁸
I have managed to fit the lamps to the handlebars using brackets that I had in spares box
------------You may not use this post in Cycle or other magazine ------
Re: Acor averhallo handlebar riser wider lower 25.4mm tubing?
These would do the trick.
https://www.ebay.co.uk/itm/UK-Road-Bike ... SwQJlf7URA
As others have said 25.4 tube is readily available. I have the same Satori riser for our tandem so know that our stockers bars have a wide enough bulge. Of course not all bars will.
https://www.ebay.co.uk/itm/UK-Road-Bike ... SwQJlf7URA
As others have said 25.4 tube is readily available. I have the same Satori riser for our tandem so know that our stockers bars have a wide enough bulge. Of course not all bars will.