Best wishes for Brucey
Re: Best wishes for Brucey
Thank you for that Carlton - we all miss Brucey's knowledge, experience, understanding and patience with some queries from time past.
Re: Best wishes for Brucey
+1
Convention? what's that then?
Airnimal Chameleon touring, Orbit Pro hack, Orbit Photon audax, Focus Mares AX tour, Peugeot Carbon sportive, Owen Blower vintage race - all running Tulio's finest!
Airnimal Chameleon touring, Orbit Pro hack, Orbit Photon audax, Focus Mares AX tour, Peugeot Carbon sportive, Owen Blower vintage race - all running Tulio's finest!
- simonineaston
- Posts: 8077
- Joined: 9 May 2007, 1:06pm
- Location: ...at a cricket ground
Re: Best wishes for Brucey
Good to hear of the chap - if anyone does get over to see him, please do pass on all the best from us all !!it might be possible for them - just one agreed person would be sensible - to talk to him directly.
S
(on the look out for Armageddon, on board a Brompton nano & ever-changing Moultons)
(on the look out for Armageddon, on board a Brompton nano & ever-changing Moultons)
Re: Best wishes for Brucey
Thanks Carlton for the update.
Here’s hoping Brucey is bearing up ok.
Best wishes,
Luke
Here’s hoping Brucey is bearing up ok.
Best wishes,
Luke
Re: Best wishes for Brucey
I was just thinking of him this morning so good to hear that he’s bearing up.
“I Know Where I’m Going” is one of my favourite P&P films too, filmed at Carsaig on the south coast of Mull if you ever happen to be cycling past, as untouched as it was when the film was made and some very steep hills to tackle on the way!
“I Know Where I’m Going” is one of my favourite P&P films too, filmed at Carsaig on the south coast of Mull if you ever happen to be cycling past, as untouched as it was when the film was made and some very steep hills to tackle on the way!
Re: Best wishes for Brucey
Excellent news that Brucy is still looking at hub designs. I'm still running the (fairly) unique Sachs Maillard "big balls" front tandem hub he shipped me..and of course using the years of accumulated advice Brucey has encapsulated on this sites posts. I really enjoyed our joint investigations on Shimano's different parts with the same part number - this saved us from a horrible old/new SPD cleat/pedal mismatch recently. Wishing him all the best. George.
Re: Best wishes for Brucey
Great to see Brucey back
Whatever I am, wherever I am, this is me. This is my life
https://stcleve.wordpress.com/category/lejog/
E2E info
https://stcleve.wordpress.com/category/lejog/
E2E info
Re: Best wishes for Brucey
It most certainly is.
-
- Posts: 3719
- Joined: 22 Jun 2019, 12:27pm
Re: Best wishes for Brucey
Gosh, all of the four above . What wonderful news .
Don’t fret, it’s OK to: ride a simple old bike; ride slowly, walk, rest and admire the view; ride off-road; ride in your raincoat; ride by yourself; ride in the dark; and ride one hundred yards or one hundred miles. Your bike and your choices to suit you.
Re: Best wishes for Brucey
Er.....I'm not sure that the thought that "Brucey is back" is correct - this post from 'zenitb' is dated 8 Oct 2022 - I wish it was correct though, and I only hope that Brucey is still keeping his eye on us. Best wishes to you if you are Brucey.zenitb wrote: ↑8 Oct 2022, 12:10pm Excellent news that Brucy is still looking at hub designs. I'm still running the (fairly) unique Sachs Maillard "big balls" front tandem hub he shipped me..and of course using the years of accumulated advice Brucey has encapsulated on this sites posts. I really enjoyed our joint investigations on Shimano's different parts with the same part number - this saved us from a horrible old/new SPD cleat/pedal mismatch recently. Wishing him all the best. George.
And best wishes to all his well-wishers.
Last edited by JohnW on 8 Oct 2023, 11:32pm, edited 1 time in total.