Barrel Adjusters

Wappers · Post by **Wappers** » 15 Apr 2008, 3:15pm

Where can I buy some barrel adjusters online for my Kaffenback?

I think I am looking for something like this:

Woodbridge Pete · Post by **Woodbridge Pete** » 15 Apr 2008, 8:16pm

Campag downtube adjusters would probably be OK for that. Just unscrew them form the brackets and put them in your frame

Post by **Mick F** » 15 Apr 2008, 9:36pm

http://www.ribblecycles.co.uk/productde ... 0000000000

These might do it, as Pete said. Hopefully the threads are the same.

Wappers · Post by **Wappers** » 16 Apr 2008, 8:16am

Hmm, I was hoping this would be a cheaper part. It will probably be a couple of weeks before I can get to a proper bike shop.

Willpower · Post by **Willpower** » 16 Apr 2008, 8:56am

The shimano DT stops will work for you, I think. I recently unscrewed the adjuster bit (watch out for the spring which will try and leap out and hide somewhere) and put it in a very similar braze on to what you have pictured there.

Yorkshireman · Post by **Yorkshireman** » 16 Apr 2008, 9:56am

You can have these (free)

if you want them. They're from an old set of alloy calipers, the lock-nuts might clean up (slight surface rust) or you could replace them. The adjusters themselves just need a bit of a clean up. If you want to PM your address I'll post them to you.

Wappers · Post by **Wappers** » 16 Apr 2008, 10:52am

I have sent you a PM

mr riff raff · Post by **mr riff raff** » 16 Apr 2008, 8:32pm

I've got frames with similar set up. If they're the same as mine, then Campag ones don't fit. They need to be an M5 thread, which the Campag aren't.
I got some off Jackson's in Leeds. They post them to you. Well, they did for me.

lauriematt · Post by **lauriematt** » 25 Apr 2008, 12:02pm

fleabay?!?!?!