Page 1 of 2

oops! (hub failure)

Posted: 15 Mar 2019, 10:42am
by Ugly
IMG_0860.JPG


This happened in my brothers frost proof garage, the hub is from Campag wheel unused for a few years. Looks like a job for both duct tape and superglue

Re: oops! (hub failure)

Posted: 15 Mar 2019, 10:46am
by Vorpal
Duct tape and super glue?!?

Re: oops! (hub failure)

Posted: 15 Mar 2019, 10:58am
by Brucey
Image

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:16am
by Postboxer
I guess the garage is the best place for hub failures.

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:19am
by Bonefishblues
Vorpal wrote:Duct tape and super glue?!?

Quite right - needs Blu Tac, too.

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:20am
by whoof
Greasing the bearings should be really easy now, once you've picked them all up off the floor.
Edit doesn't look loose bearings, don't bother.

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:20am
by Bonefishblues
whoof wrote:Greasing the bearings should be really easy now, once you've picked them all up off the floor.

Good line, but they are cartridges, aren't they :D

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:22am
by whoof
Bonefishblues wrote:
whoof wrote:Greasing the bearings should be really easy now, once you've picked them all up off the floor.

Good line, but they are cartridges, aren't they :D


In one minute I posted twice and you once. We need to get out more.

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:24am
by mig
mice?

Re: oops! (hub failure)

Posted: 15 Mar 2019, 11:33am
by Bonefishblues
mig wrote:mice?

They'd have issues with standover, I suspect.

Re: oops! (hub failure)

Posted: 15 Mar 2019, 2:57pm
by rjb
It's not all its cracked up to be. :lol:

Re: oops! (hub failure)

Posted: 15 Mar 2019, 5:23pm
by cycleruk
A couple of jubilee clips should fix it. :roll:

Re: oops! (hub failure)

Posted: 15 Mar 2019, 5:36pm
by gaz
.

Re: oops! (hub failure)

Posted: 15 Mar 2019, 6:03pm
by S2L
THe Joy of a radial construction...

Re: oops! (hub failure)

Posted: 15 Mar 2019, 9:39pm
by reohn2
I think things got a leettle too tense,or perhaps I spoke to soon......